PV solar system tracking bracket

Place of Origin	Zhejiang, China		Brand Name	CY PV system tracking bracket
Model Number	CY-ZJ11		Specification	Normal
Application	Commercial		Output Voltage (V)	240V
Load Power (W)	standard		Solar Power (W)	standard
Work Time (h)	24hours per day

Specifications

PV system tracking bracket
1.Tilt Angle: With linear actuator
2.Accuracy angle in tracking
3.Easy installation

PV system tracking bracket:

 

 

This solar tracking system is designed for large solar plants. The substructure of it is concrete foundation. So you have to pour the concrete foundation at the installation site. Because of the concrete foundation substructure, it can suit for all types of soil. Besides, some components have been pre-assembled at our factory, so it can also save your installation time and labor. So your project schedule will be shortened and your budget will also be decreased accordingly.

 

 

 

This solar tracking system is made of high-quality aluminum and hot dip galvanized steel which can aviod corrosion. Because of the high quality, it can reach 25 years of service life and furthermore, we promise with 10-year warranty. 

 

 

 

This solar tracking system has a emergency device. When the wind is larger than the wind load it can sustain, it will change the inclination to horizontal in order to lower the wind load. 

 

 

 

The panel capacity of our single axis tracker can be changable.

 

 

Advantage:
1. Universal application
350 tracker is DC motor for driving linear actuator, it can be used for both on-grid and off-grid application
2. Over 30% increase on radiation reception from sun
Comparing with fixed installation, with 350 single axis tracker over 25%~30% increase on relation reception from sun will be gained.
3. Higher power installation with less occupied area
Unique pre-tilt single axis tracking structure design ensures land saving for both small scale and large PV plant. The installation peak power can be more than 10% higher than traditional single axis tracker.
4. Weather resistant
PLC drives PV modules following sun’s trajectory predicted based on Solar Position Arithmetic instead of light sensor so that cloudy weather will not impact on its tracking. And the tracker’s structure design can make the array move to horizontal protection position under the condition of huge wind via anemometer.
5. Lower Maintenance
Detailed environmental test including climatic test, mechanical test and electrical test ensures long life operation under harsh condition. And the special design of driving parts makes whole system work well without maintenance for long time, which promise very lower maintenance cost. Due to lower assembly position of driving parts, the replacement of driving parts is very easy.
Standard 10 years guarantee is presented.

 

 

PV system tracking bracket—CY-ZJ11

 

 

The top 7 advantages of ground screw: 

 

 

 

Advantage	Ground screw
1. Single processes	There are several steps including construction alignment, digging, concrete formwork, wiring reinforcement and so on.
2.Quick contruction speed	A 1MW project needs 18 individuals woking 20 days.
3.Low cost	The installation at leastt costs 0.02USD/watt which costs twice as much as.
4.Assured processing quality	Extensive construction can not make sure appearance, size of the fundation.
5.Low requirement on environment	It can't be constructed on snowy or extremly cold days and also has requirements on water.
6.Low demands on workers	The construction work must need professional and experienced people to handle with.
7.flexible configuration of workers	It needs a lot of worker for the construction work is difficult.

 

 

 

 

Technical data:

 

 

Azimuth control	Drive
	Control Angle (Horizontal)
	Motor
Elevation	Drive	Worm drive (Roller bearing )
	Control Angle (Vertical)	-45 °to +45 °
	Motor	2,800RPM(120W/DC240V)/(Ration288:1→10.4RPM)
Max. Power consumption		120W
Main Materials		Galvanized steel
Tracking method		Standard: Solar-Sensor  tracking/Optional: Data-tracking
Controller		Auto mode/Manual mode
Min. sunlight for tracking		300W/m²
Foundation		Ground Screw
Max. Wind load	Normal operation	14m/s(50km/h)
	Safety mode(0°)	35m/s(126km/h)
	At45°angle(Constant)	25m/s(90km/h)
	At 45°angle(Instant)	66.5m/s(230km/h)
Night mode(Horizontal idling mode		1)Below300W/m²over2hours.  2)Warnings from sensors
Warranty		Mechanical parts:10years Electrical parts: 1 year

 

 

 

 

Why choose our CY  PV system tracking bracket?

 

 

1. Easy installation.

 

The professional design makes this  PV system tracking bracket install very easily. So it not only saves your installation time but labor. Your schedule will be shortened and budget will also be decreased accordingly.

 

 

2. High quality.

 

This  PV system tracking bracket has the certificates of RoSH, CE and ISO9001 with 25-year service life. Also we provide the 10 year of warranty.

 

 

3. Competitive price.

 

As we are a manufacturer, our price is very competitive in this market.

 

 

4. Design.

 

We have a professional engineering team who can provide you with the most economical and suitable design for your project according to your requirements.

 

 

5. Quick delivery

 

The safety package and quick delivery.