QZ3-10 Front-load Pneumatic Power Lathe Chuck Wood Lathe Tools

QZ3-10 Front-load Pneumatic Power Lathe Chuck Wood Lathe Tools

Technical features:

1. The connecting between the chuck and main shaft complies with the national

    standard (short  cylinder connecting mode), so user only need to prepare right

    connection flange compatible with machine tool and chuck instead of changing

    the machine tool structure during installation.

2. The whole installation process is quite easy. The chuck body is the cylinder, with

    piston and invertted vavle inside to achieve super-long time pressure-keeping

    function (more than 24 hours). The clamping and loosing movement is achieved

    by rotary air inlet at the side. The machine will not work before cutting off the gas

    supply.

3. The chuck boasts advantages of less weight, big hole diameter, high stroke and high

    rotating speed, which is applicable for lathe, pipe thread machine tool and welding

    equipments.

4. Note:The chuck is ventilated while it clamps or loosens,and its ex-circle is Clamped

    by the special seal on the distributing ring, so principal axis of the lathe should stop

    rotating when the chuck clamps or loosens. 

5. Two-jaw and four-jaw are available.

There are three questions to answer to aid the correct choice of power chuck:
1. Type and model of CNC lathe.
2. Length of workpiece?
3. Outer diameter of workpiece?
4. Processing requirement?

Size Parameters

It is recommended to grease chucks at least twice a day in order to maximize longevity

Performance Parameters

The matching products including:

1. Soft jaws.

2. Oil-water separator, manual solenoid valve, air hose, foot-switch, Hex. socket head bolt

3. Oil-water separator, manual solenoid valve, air hose, manual-switch, Hex. socket head bolt

lathe chuck lathe chuck lathe chuck lathe chuak lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck lathe chuck