Z-wave Tubular Motor (ZW42B)

Technical data & Instructions

Introduction

This Z-wave motor is a standard motor, smooth running, low noise & easy installation, suitable for electric blinds,electric shutter, electricscreens etc..

Technical data 

• Rated voltage: AC 230V 50Hz / 120V input
• Rated currency: 0.6A
• Rated power: 140W
• Rated torque: 10N.m
• Rail: not include (sample included 1m rail)
• Roller curtain including control panel
• Range: Min 30m line of sight

Frequency:868.2MHz/865.2MHz/908.2MHz/921.2 MHz/869.0MHz

Control Panel Wiring Diagram

The switch on Panel(On, Stop & Off) control motor’s CW, Stop & CCW.

Quickly press panel switch 3 times to add in to Gateway. 

Safety and maintenance instruction

• Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
• Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
• Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
• Keep all parts away from young children’s reach.
• Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
• Avoid dropping or shocks, this can damage the electronic boards.
• Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.

Maintenance

The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.

Warranty 1 year