Intelligent Customized Single Phase Electric Power Meter DDS28-1 Energy Meter

1.Stable measuring accuracy, general speaking, it would be free from effect of frequency, temperature, voltage or high order harmonic. After leaving the factory, it is unnecessary to make further regulation to the complete machine, it is allowable to prolong the verification period, which sharply reduces the testing and inspection work of power department, it has obviously advantage in reliability when comparing with other similar products.

2.Bi-directional measuring function, it is able to measure out the forward and reverse active energy accurately, and the reverse active energy would also be reckoned in forward value.    energy meter electrical

3. It is able to reserve the data of electric quantity permanently without help of standby battery.

4. The register will be driven by single chip directly, preventing pulse-loss phenomenon during power on or off, which guarantees consistency of meter reading data and register indicating value, avoids unnecessary dissension due to inconsistency of data.    remote control energy meter

5. Adoption of optical coupling isolated passive pulse output interface .    modbus single phase energy meter

6.This meter is featured with wide load, high accuracy, high reliability, high sensitivity, straight error curve, low power consumption, small volume, light weight, energy saving, material saving, direct register display, etc.

1.Starting: under conditions of reference voltage,reference frequency and power factor is 1.0, the meter should be able to start and measure the electric energy normally when meter of class 1 is 0.4%Ib and meter of class 2 is 0.5%Ib.

2.current in current circuit, testing output of the meter shall not produce more than one pulse.

3. Power consumption: ≤2W (5VA).     modbus single phase energy meter

4.Ambient conditions Standard working temperature: -25℃～55℃

    Limiting working temperature: -25℃～60℃     single phase energy meter electrical power meter

    Note: limiting working temperature for special requirements: -40℃～70℃

5.Outline and installation dimension drawing

Being packed according to the international standard is to guarantee safe delivery during the transportation. 

•Professional manufacturer with internationally standard production lines and a devoted technical team.

•Strict test procedure with advanced test equipment

•Responsive and responsible service team.

•Door to door service when needed.

•Helpful and enthusiastic in developing the buyers’ business. 

•Treat your career as our career. 

Certifications: