Polyurethane Waterproof Paint

FOB Price

Negotiable

1 (Min. Order)

Request Sample Customized Request Request Free Catalogs

Contact Now

Get lowest price

Product Details

Place of Origin

Shandong, China

Product Description

Specifications

1. simple application,reliable performance,no joint gap.
2.good cold&heat resistance,grease-proof&wearpoof,ageingresistance,a

description:

It is a kinds of soldifying type waterproof paints with reaction of two groups materials.There are two kinds:one is black colour with bitumen base,the other colourful with environmental bases.
Feature:
It forms an elastic waterproof layer like rubber membrane after solidifying at normal temperature.It enjoys many good featureas follows:
1. simple application,reliable performance,no joint gap.
2.good cold&heat resistance,grease-proof&wearpoof,ageingresistance,and corrosion resistance.
3.firm adhesion and good enlongation.
4..good weaterproofing,not dissolved in weater,and it can be used together with cement and talc powder.

Specifications:
1).technical standard:JC/T500-92(96)
2).tension strength: ≥ 1.65MPa.
3).fraction elongation: ≥ 350%
4).cold flexibility:-30 ± 1 2h no crazing
5).weater impermeability:0.3MPa 30min no leakage
6).application time: ≥ 20min
7).solidification time:surface<4h,total ≥ 12h.
8)solid percentage: ≥ 94%.
Usage:
1.It is especially suitable to irregular roof waterproofing such as slanting roof, gutters canopies,etc.
2.It is also widely used in the waterproofing and leakproofing of undergroup projects, inner external walls,kitchen and bathroom,swimming pool,etc.
3.It can be used to connect the gap between metal pipelines and concrete as well as the sealing waterproofing of concrete parts.
4.other waterproofing,corrosion resistance and adhesion,etc.
Application:Pour Group I(transparent liquid)and Group II(black or colourful liquid) intoa clean and dry vessel at the weight rate of 1:2or1:1.5,then stir 3minutes to make them mix well for reaction,It is requested to use up within half an hour at the temperature of over 0 For 2mmthick waterproof layer ,it needs to paint 2tims --first time use 30%paint while second time 70%.For over 3mm thick waterproof layer ,paint 3 times--everytime use one third paint.
Attention:
1).the storage place should be dry,aerating and avoid water.
2).it is forbidden to contact fire because the easy is easy to burn .
3).stir the paint homeogeneously before application if Group II materials is found to be of some precipitate.
4).the finished paint waterproof layer should be protected well to avoid damage befor the applcation of protection layer.In case the paint layer is found to be damaged ,cut down around the place torepair with paint.

Contact Us

Shandong Huiyuan Building Materials Group Co., Ltd.: Contact nameYuanyuan Cheng
Chat Now; Phone86-536-5519959; AddressTaitou Town, Weifang, Shandong

*Email
Please enter Your valid email address.
*To

Yuanyuan Cheng
*Message
Your inquiry content must be between 20 to 5000 characters.
Please enter a correct verification code.

Product Categories

ASPHALT SATURATED FELT/UNDERLAYMENT BUILIDNG PAPER	BITUMEN MEMBRANE	Film faced Plywood,MDF	INTERIOR WOODEN DOORS(HDF,.SOLID ,FLUSH)
New Products	POLYESTER MAT/GEOTEXTILE	POLYTHENE POLYMER COMPOUND UNDERLAYMENT	POLYTHENE FILM/BUILDERS' FILM. DAMP PROOF COURSE
PU PAINTING,COATING,PRIMER.AND EMULSION	PVC ;EPDM WATERPROOFING MEMBRANE HIGH PERFORMANCE	SHINGLES,BITUMEN TILE

Polyurethane Waterproof Paint

You May Like

Product Details

Product Description

Specifications

Contact Us

Product Categories

New Products

Popular Searches

Recommended Products

Find Similar Products By Category