Shenzhen FY- EES Industrial Electric control cabinet

FY- EES Industrial Electric control cabinet

Specification:

1> The main frame is made of nine folds structure and welded by special 3-Tees, With fine appearance and firmed configuration.

2> The distance between the lower rim of the cabinet and the ground is about 25mm, there are round holes in each 25mm distance on the upper board, which can not only strengthen the stress of the door but also can install other accessories.

3> The installation panel takes 25mm distance as unit that can be moved and adjust the depth.

4> There are round holes and square holes in each 25mm distance on the nine folds structure frame which can make the inner installation and fixed machine easily.

5> The top cover, side panels, rear panel and bottom panel are all fixed by screws which is easy for installing and uninstalling, the installation in cabinet inside is more convenience.

6> The cabinet be processed by professional automatic polyurethane gasket filling machine and using 3 points lock which can make sure the cabinet be sealed well, IP55.

7> The three part bottom panels for input line hole are replaced, which can move freely, these can make the cable entry easily.

8> It is easy to install and uninstall the base (Optional).

9> We can manufacture the cabinet as customised.

Surface Treatment: Degreasing , Phosphating, Powder coating.

Material: SPCC Cold rolled steel or SUS 304

Color:   RAL 7035(grey)