Home > Products > Medium Voltage Switchgears > 12kV ring main unit
12kV ring main unit
- 100 Set / Sets per Month
- Shanghai Guangzhou Qingdao
- T/T L/C D/P D/A Credit Card PayPal
You May Like
Product Details
Place of Origin | Hubei, China | Brand Name | Zhongsheng | |
Model Number | HXGN-12 |
Product Description
Product name: 12kV ring main unit
Model no.: HXGN-12
Description:
HXGN-12 ring main unit is a cost effective extensible switchgear for three phase AC 50Hz, 12kV distribution system, and widely used in utility, industrial and commercial applications.
Technical parameters:
Rated voltage | 12kV |
Rated power frequency withstand voltage (1min) | 42kV |
Rated lightning impulse withstand voltage | 75kV |
Rated frequency | 50Hz, 60Hz |
Rated current | 630A (Load break switch) |
125A (Load break switch-fuse combination) | |
Rated short-time withstand current (4s) | 20kA |
Rated peak withstand current | 50kA |
Rated voltage of auxiliary control circuit | DC/AC 110V/220V |
Protection degree | IP2X |
Size (W*D*H) | 800 / 900*1000*2000mm |
Features:
1. Metal-clad and fully enclosed structure, can prevent dirt and small animals from entrance.
2. Through the observation windows in the door panel, switch position and general condition can be clearly viewed.
3. The door and switch operating handle are mechanically interlocked to ensure the door cannot be opened with the switch closed and the switch cannot be closed with the door open.
4. The switchgear use vacuum switches combined with solid insulation material. This environmentally-friendly technology avoid the uses of SF6 as an insulation gas.
5. Reliable FIVE-PREVENTION interlock can effectively prevent from mal-operation.
1). Prevent switching on or off disconnector when circuit breaker, load break switch or contactor are in switching on condition.
2). Prevent switching on or off circuit breaker, load break switch or contactor by mal-operation.
3). Prevent switching on circuit breaker or load break switch when earthing switch is in switching on condition.
4). Prevent switching on earthing switch in live condition.
5). Prevent entering compartments in live condition.
Sturcture:
1. Enclosure is built around steel skeletal construction, and apply epoxy resin power spray coating, the above adopted treatment methods ensure a very strong anti-corrosion capacity for the switchgear housing.
2. The cubicle is separated into several functional compartments by metal sheet, including busbar compartment, circuit breaker compartment, cable compartment and low voltage compartment. Fused or non-fused load break switch is installed in circuit breaker compartment.
3. Pressure relief channels are included. In case of faults inside the compartments resulting in arc, the pressure is released from pressure relief channels. In this way, it can ensure the safety of operating staff and the cubicle.
Climate and environment:
1. Altitude: ≤ 1000m
2. Temperature: -15℃ to 40℃
3. Relative humidity:
Daily average relative humidity: ≤ 95%
Monthly average relative humidity: ≤ 90%
Standards applied:
No. | Standard no. | Title |
1 | IEC 62271-200:2003 | Alternating-current metal-enclosed switchgear and controlgear for rated voltage above 1kV and up to and including 52kV |
2 | IEC 62271-1:2007 | High-voltage switchgear and controlgear - Part 1: Common specifications |
3 | IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
4 | GB 3906-2006 | Alternating-current metal-enclosed switchgear and controlgear for rated voltage above 3.6kV and up to and including 40.5kV |
5 | GB/T 11022-2011 | Common specifications for high-voltage switchgear and controlgear standards |
6 | DL/T 404-2007 | Alternating-current metal-enclosed switchgear and controlgear for rated voltage above 3.6kV and up to and including 40.5kV |
7 | GB 50060-2008 | Code for design of high voltage electrical installation (3 ~ 110kV) |
8 | GB/T 16927.1-2011 | High-voltage test techniques - Part 1: General definitions and test requirements |
Selection of switchgear:
If customer has special requirement, please contact and consult with us.
Typical primary scheme diagram:
Contact Us
- Hubei Zhongsheng Electric Co., Ltd.
- Contact nameShane Deng Chat Now
- Phone86-710-3253168
- AddressBuilding B38, Jiahai Industrial Park, High-Tech Zone, Xiangyang, Hubei
Product Categories
Low Voltage Switchgears | Medium Voltage Switchgears | Motor Soft Starter | New Products |
Power quality solution |
New Products
-
Solid state soft starter for asynchronous squirrel-cage motor
-
Slip ring motor starter
-
SCF Series Electronic Motor Frequency Converter Speed Controller
-
SCF intelligent dc/ac power frequency inverter
-
China Manufacture Solid Soft Starter 55kw to 15000kw under 10kv
-
SYQ three phase AC 0.38kv~10kv slip ring motor liquid soft starter
-
SMS series industrial energy saving device of slip ring motor made in China
-
SLC series synchronous motor excitation electric control device
-
Slip Ring Electric Motor Soft Starter 55kw made in China
-
SMS serieslow voltage pump control panel
-
Wound motor power factor correction device electronic energy saver
-
SMS Static Phase Advance made in China for rolling mill, cross pipe machine, crusher, sugar mill
-
SMS series China products constant load static phase advancer crane control panel
-
SMS series constant load static phase advancer crane control panel
-
SMS Series Intelligent High Tech Static Phase Advancer made in China
-
SMS wound motor power factor correction device manufacture China
-
SGQ soft starter for air compressor 500kw motor soft starter
-
China supplier solid low voltage 55kw 0.4kv motor electrical soft starter
Popular Searches
- switchgear
- distribution board
- Zinc Oxide Varistor
- Lightning Rod
- spd
- surge protector
- surge arrester
- surge suppressor
- power surge
- lightning arrester
- zinc oxide lightning arresters
- Lightning Arrester Rod
- Lightning Rod Tower
- Polymer Surge Arrester
- electrical switchgear
- zinc oxide varistors
- power distribution unit
- pdu
- Power Supply Device
- distribution cabinet
- Metal Oxide Varistor
- cabinet pdu
- rack pdu
- power distribution cabinet
- Power Resistor
- High Voltage Resistor
- switchboard
- hv switchgear
- gas insulated switchgear
- ring main unit
Recommended Products
- Wholesales NSPV MLJ-01 connector Solar PV Panel Mini Junction Box
- 17.5 KV Full-enclosed Outdoor Epoxy Resin Casting and Double Pole Insulated Voltage Transformer
- JDZX10-10 Single Phase Indoor Fully Insulated Resin Integrated MV&HV Transformer 10kv High Voltage JDZ10-10A/B
- JDZ10 Sheep Angle Enclosed 10kV Indoor High-voltage Transformer
- JDZ10-10A B BE Indoor High-voltage Fully Enclosed Type Voltage Transfommer
- 33Kv Voltage Transformer Power Transformer 110V 220V Voltage Converter 10Kw High Voltage Transformer 15Kv
- Factory Directly Sells JDCF Single Phase Outdoor High Voltage Potential Transformer 110KV Oil Filled PT
- JSZV12-10R 2025 Fuse Voltage Transformer High Performance Transformers Product Genre
- JSZV12-10R Type High Voltage Voltage Transformer 10KV Indoor Dry Three-phase Built-in Fuse
- Chinese Supplier Step Down Cast Resin Dry Type Intermediate Frequency Transformer
- Transformer 75KVA 7.2KV/0.12KV Factory Price Energy-saving Oil-type Single-phase Transformer for Sale
- JLSZY-10 Outdoor Single-Phase Three-Wire High Voltage Measuring Box 10KV Dry Combined Transformer for Power Use
Find Similar Products By Category
- Electrical & Electronics > Power Supply & Distribution > Power Distribution Cabinet & Box
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Shane Deng
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile