NEW Cisco WS-C2960X-48LPS-L 2960-X 48 GigE PoE 370W, 4 x 1G SFP

Product view 

Packing 

Running Express Setup

When you first set up the switch, you should use Express Setup to enter the initial  IP information. This enables the switch to connect to local routers and the  Internet. You can then access the switch through the IP address for further
configuration.

To run Express Setup:

Step 1 Verify that no devices are connected to the switch, because during Express Setup, the switch  acts as a DHCP server. If your PC has a static IP address, before you begin, you should change  your PC settings to temporarily use DHCP.
Step 2 Connect the AC power cord to the switch and to a grounded AC outlet. The power-on self-test  (POST) begins. During POST, the LEDs blink while a series of tests verify that the switch  functions properly. LED behavior during POST is unpredictable and might vary.
Step 3 Wait for the switch to complete POST. It might take several minutes for the switch to complete  POST.
Step 4 Verify that POST has completed by confirming that the SYST LED rapidly blinks green. If the  switch fails POST, the SYST LED turns amber. POST errors are usually fatal. Call Cisco Systems immediately if your switch fails POST.

Step 5 Press and hold the Mode button for 3  seconds. When all of the LEDs above  the Mode button turn green, release
the Mode button. If the LEDs above the Mode button  begin to blink after you press the  button, release it. Blinking LEDs
mean that the switch has already been  configured and cannot go into  Express Setup mode. 

Step 6 Verify that the switch is in Express Setup mode by confirming that all LEDs above the Mode  button are green. (The redundant power system (RPS) and Power over Ethernet (PoE) LEDs  remain off on some models.)

Step 7 Connect a straight-through  Category 5 Ethernet cable (not  provided) to any 10/100 or  10/100/1000 Ethernet port on the  switch front panel and to the Ethernet  port on the PC.
Step 8 Verify that the LEDs on both Ethernet ports are green.
Step 9 Wait 30 seconds.

On-site and Remote Cisco Services:

>Audit of your existing IT systems to ensure the most efficient use, including how Cisco equipment and services are being used.
>Supply of Cisco hardware, software and services.
>Implementation of Cisco hardware and software.
>Support and Maintenance of your IT infrastructure.

Support

Lead Time: We usually take 3-5days in delivery to the major worldwide cities.

Technical Support: We provide free technical support for all equipment purchased from New Jackson. This substantially reduces risk for our customers, and, should an issue arise requiring intensive technical support, delivers significant cost savings.

Our team is one of the most knowledgeable and experienced in the new and used equipment market. They are available to answer your product-related questions or to help you to troubleshoot any network issues. They can help with both pre- and post-sales support.We have ready access to extensive product documentation and literature, and can provide insight into the latest industry innovations and technologies.

Personalized Service: We provide personalized services in the area of packaging, quick response, technical support, safe packing, shipping etc

Employing firewall solutions from vendors Cisco, can help your business:

• Control incoming and outgoing traffic between the Internet and your protected networks

• Hide your internal IP addresses from the external network

• Control User Authentication

• Configure access rules by user or group

• Secure communication tunnels for remote users/Branch Office VPN

• Filter by user, group, time-of-day or content category

• Generate reports to show user network activity

• Create secure wireless connectivity for your office LAN and segregated wireless networks for visitors