USB Console Cable for Cisco h3c d-link, Ruiejie, Huawei, HP Routers

• Two cables in one, Less clutter in your network tool bag!
• Combines a USB to serial/RS232 converter and a console 'rollover' cable for Cisco routers
• Configure your router with just one cable, direct from a USB port
• Length approx 1.7m/5ft 6ins (if required, you can add a USB extension cable up to a total of 5m long)
• Maximum RS232 speed 500kbaud
• USB 2.0 (1.1 compatible)

Product Features:

1.The RJ45 connector can also be adapted to DB9 via RJ45-to-DB9 adaptors.

2.This USB cable has an embedded FTDI 232 and RS232 level shifter to produce true RS232 levels.

3.USB to Serial cable, RJ45 presentation and pinouts for direct connection to Cisco and other network equipment serial console ports.

4.Pinouts for this cable RJ45 end are:

  Pin1=CTS

  Pin2=DSR

  Pin3=RX

  Pin4=Ground

  Pin5=Ground

  Pin6 = TX

  Pin7 = DTR

  Pin8 = RTS

5.Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS.

6. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity .

7.Supports hardware flow control used to implement the CISCO break sequence

8. USB 2.0 Full Speed compatible

_____________________________________________________________________________

Benefits:

1.No more cables & adapters to buy and/or make to get it working

2.No more DB-9 Adapters

3.No more Mickey Mouse Prolific driver problems

4.No more fake Prolific chips