MH320 Portable Metal Hardness Tester/Leeb Hardness Tester/Durometer

Specifications

Advantages
1.Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
2.Large screen(128×64 dot matrix LCD), showing all functions and parameters.
3.Test at any angle, even upside down.
4.Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
5.Seven impact devices are available for special application. Automatically identify the type of impact devices. 
6.Large capacity memory could store 500 groups (Relative to average times32~1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc. 
7.Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit. 
8.Battery information indicates the rest capacity of the battery and the charge status.
9.Software to connect with PC via USB port. 
10.Thermal printer integrated, convenient for in field printing. 
11.NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
12.Auto power off to save energy.
13.Outline dimensions:212mm×80mm×32mm.

Technical Specifications
Measuring range:HLD(170~960)HLD
Measuring direction:360°
Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
Display:dot matrix LCD,128×64 dots
Data memory: 500 groups max.(relative to impact times 32~1)
Printing paper: width is (57.5±0.5)mm, diameter is 30mm
Battery pack: 6V NI-MH
Battery charger: 9V/500mA
Continuous working period:about 150 hours(With backlight off, no printing)
Communication interface:USB1.1