LED Lighting ceramic thermal pad

        LED Lighting Ceramic Thermal Pad  is recommended for applications that require a minimum amount of pressure on components. The viscoelastic nature of the material also gives excellent low stress vibration dampening and shock absorbing characteristics. Ultra Soft Silicon Thermal Pad  is an electrically isolating material, which allows its use in applications requiring isolation between heat sinks and high-voltage, bare-leaded devices.

 Features & Benefits:

-Thermal conductivity:1.0w/m.k                                

-One side slightly tacky, the other side moderate tacky

-Ultra softness offer high conformability at low stress application.

-Reinforced fiberglass for puncture, shear or tear resistance.

Configurations:

-Sheet form, die-cut parts

-Tape application available

Size available:

200x400mm

Thickness available:

0.5-15.0mm, increment by 0.5mm

For more details and application direction,welcome to contact our sales!

Typical Applications Include

• Telecommunications,Handheld devices
• Computer and peripherals,PDP display
• Power conversion,Flat panel display,Memory modules
• Between heat-generating semiconductors or magnet components and a heat sink
• Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader

  Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.

Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.

Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LD8100U,only one side has natural tacky.

Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.

Q:Will the heat make the thermal pads softer?
A: From -60-150,there is no significant change in the hardness of thermal pads, as gap filler.

Q: What’s the tolerance for the thickness?
A :Normally ±10%.

Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.

Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.

Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LD8100U has fiberglass on its surface, all other models will be made at your requirement.