SURECOM SA250 Full Band VHF UHF Colour Graphical Antenna Analyzer radio handheld

This is a Surecom SA250 3 bands mini color graphic antenna analyzer. 100% brand new, factory sealed.

Features:

SA-250 antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feed lines.
Mainly, these are S.W.R. (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).
Easy-to use measurement modes. make SURECOM attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.

Main Features: 
          2.2 ” precision LCD screen,High-lumen LCD brightness,  easy to read in direct sunlight
          Heavy duty Aluminum enclosure,strong anti-interference ability.
          Very compact and convenient for field use
          Built-in rechargertable Li-ion battery
          Full Band control (No need select Band )
          Easy setup, only four control buttons with convenient on-screen  soft menus
          Constant Battery Status Indicator and Auto Shut-off
          Built-in timer shows elapsed time when unit is turned on
          High efficiency IC, low power consumption, the longest working hours
          More choice measurement frequency Span .
          One botton quick scan mode (V1,V2,U) or 3 band by full screen.
          Auto marker the Best s.w.r. level reference 

Power Management
Power Source: Built-in 3.7V, 900-mAh ,Size 14500 of Lithium battery.
Charge Controller: Smart charger, LED charging-status indicator
Voltage Monitor: On-screen DVM, plus battery condition icon
Charger Source: Any USB port, analyzer accepts Micro-USB plug
Power Savers: Auto-off timer, Auto Run/Stop RFgenerator controlInterface
RF Connector: SMA-female , (optional PL-259 ,N connector need adapter)
Battery Charge Connector: Micro-USB
Screen: 2.2 inch high-output color TFT
Function Keys : 4 botton, with on-screen (soft-menu) identifiers
Tuning: Rotary encoder with press-in tuning-step selection

Weight and Dimensions
Case: Aluminum metal 
Size: 2.8" wide x 4.0" high x 1.0" deep (7 cm x12cm x 2.5 cm)
Weight: 6.1 oz (0.172 kg)

1.0 Turn on and Turn off the power
      Turn on the power, Press and hold White botton when the dot disappear from left up angle ,. top Menu  appeared on the screen.  
      Turn off the power, You have 2 method :
                                 a) On Top Menu page ,Press and hold the  White [F1 ] botton  5 second .
                                 b) On Top Menu page , Rotary encoder on "Power off", Press the [F2 Enter] 

1.1Function Select (Please see Pic.1)
      You can turn the knob select you want function and press [F2.Enter] botton .       

2.0 ANTENNA TEST EXAMPLES (Scan mode): (Please see Pic.2)
     In the Top Menu  screen: Rotary encoder on "Scan", Press the [F2 Scan] to frequency mode measurement button, enter Scan­ (scan mode) screen.
     Press [F.2  scan ],button to start the scan operation. During scanning, in order to ensure measurement accuracy, each frequency will stay for short while.
     one scanning cycle  will take about 1-2 seconds. Once SCAN is done, it will  enter ”Present” mode (result) screen 
     You have  results on the screen :  Show the SWR curve only (because default setting SWR curve only , Zx curve, Rs curve, jx curve Disable)
     You can Enable other curve on the screen:  On Top Menu page, Rotary encoder on "Zx", Press the [F2 Enter] to enable .   (Please see Pic.1)
     Other cure will Disable when Power Off , If want enable in the future, Rotary encoder on "Save", Press the [F2 Enter] to save setting .(Please see Pic.1)

2.1 Move the curso marker: (Please see Pic.3)
     View the scan frequency point on the curve on each scan of the specific parameters of the measurement results.
     Press the  [F3.View ] button to start the view operation mode. rotary encoder ,the white triangle curve marker  is move
     Dot scale will display on screen, Press bottom change the Dot  scale,You have 3 options of Dot scale mode for choose, [Dot =x1][Dot =x10][Dot= x25] . 
     SWR Full scale will display on screen,Press bottom change the graphically plot SWR,You have 3 options scale  mode for choose, [SWR=x2 ][SWR= x 0.5][SWR=x1] .

2.2 Quick 1 start Scan mode: (Please see Pic.4)
    Quick view the scan frequency point on the curve on each scan 
     Press the button [Quick       1  ]  to start the Quick 1 operation mode .You have 3 options scan mode for choose .
     Press the button [F1 Scan V1  ] . 132 to 174 MHZ can of the specific parameters of the measurement results.
     Press the button [F1 Scan V2  ].  200 to 260 MHZ can of the specific parameters of the measurement results.
     Press the button  [F1 Scan  U  ] . 400 to 519 MHZ can of the specific parameters of the measurement results.

2.3  Quick 2 start Scan mode:  (Please see Pic.5)
     Quick view the Full band scan frequency point on the curve on each scan
     Press the  [Q2  ] button to start the Quick 2 operation scan mode.
     Press the  [ScanFull ] button to start the 3 BAND (132-174,200-260,400-519MHz )Scan operation mode. the measurement results. after you have 2 options
     mode for choose .
     Press the  [Scan2 Mk ] button to read the best SWR Yellow triangle curve marker .( operation Span 108MHz)
     Press the  [MoveCur  ] button ,Nearby the best SWR Yellow triangle curve marker,  Move right hand side  .Press again move left hand side.