Meanwell 3W DC-DC Regulated Dual Output Converter dc switching power supply/switching power supply design

ORDER NO.

DCW03A-15

OUTPUT

DC OUTPUT VOLTAGE

±15V

OUTPUT CURRENT RANGE

±10~ ±100mA

RATED POWER

3W

RIPPLE & NOISE (max.) Note.2

60mVp-p

LINE REGULATION  Note.3  

±0.5%

LOAD REGULATION Note.4

±0.5%

VOLTAGE TOLERANCE

±2.0%

SWITCHING FREQUENCY(Typ.)

50KHz min.

INPUT

VOLTAGE RANGE

A: 9 ~ 18VDC     B: 18 ~ 36VDC     C: 36 ~ 72VDC

EFFICIENCY (Typ.)

80%

DC CURRENT

Full load

A: 338mA B: 167mA C: 83mA

No load

A: 18mA B: 10mA C: 5mA

FILTER

Pi network

PROTECTION

Fuse recommended

PROTECTION

(Note. 5)

OVERLOAD

160 ~ 250% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

SHORT CIRCUIT

All output equipped with short circuit

Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.

-40~+71°C (Refer to output load derating curve)

WORKING HUMIDITY

20% ~ 90% RH non-condensing

STORAGE TEMP., HUMIDITY

-40~ +105°C, 10 ~ 95% RH

TEMP. COEFFICIENT

0.03%/°C (0~ 50°C)

VIBRATION

10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY &

EMC

WITHSTAND VOLTAGE

I/P-O/P:1KVDC

ISOLATION RESISTANCE

I/P-O/P: 100M Ohms / 500VDC / 25°C/ 70% RH

ISOLATION CAPACITANCE

80pF max.

EMC EMISSION

Compliance to EN55022 Class B, FCC part 15 Class B

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A

OTHERS

MTBF

900khrs min. MIL-HDBK-217 F(25°C)

DIMENSION

31.8*20.3*12.2mm or 1.25"*0.80"*0.48" inch (L*W*H)

WEIGHT

15g

NOTE

1. All parameters are specified at normal input, rated load, 25°C 70% RH ambient .

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.Line regulation is measured from low line to high line at rated load.

4.Load regulation is measured from 10% to 100% rated load.

5. Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.