Meanwell 3W DC-DC regulated Single Output Converter switching power supply unit

ORDER NO.

SPB03A-15

OUTPUT

DC OUTPUT VOLTAGE

15V

CURRENT RANGE

20 ~ 200mA

RATED POWER

3W

RIPPLE & NOISE (max.) Note.2

60mVp-p

LINE REGULATION Note.3  

±0.5%

LOAD REGULATION Note.4

±0.5%

VOLTAGE ACCURACY

±2.0%

SWITCHING FREQUENCY

100KHz min.

INPUT

VOLTAGE RANGE

E: 4.5 ~ 9VDC A: 9 ~ 18VDC     B: 18 ~ 36VDC     C: 36 ~ 72VDC

EFFICIENCY (Typ.)

80%

DC CURRENT

Full load

E: 810mA A: 340mA B: 165mA C: 85mA

No load

E: 110mA A: 40mA   B: 20mA C: 10mA

FILTER

Pi network

PROTECTION

Fuse recommended

PROTECTION

(Note. 5)

OVER LOAD

150 ~ 250% rated output power

Protection type : Hiccup mode, recovers automatically after fault condition is removed

SHORT CIRCUIT

All output equipped with short circuit

Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.

-40~+85°C (Refer to output load derating curve)

WORKING HUMIDITY

20 ~ 90%RH  non-condensing

STORAGE TEMP., HUMIDITY

-40~+105°C, 10~95%RH

TEMP. COEFFICIENT

0.05%/°C (0~ 50°C)

VIBRATION

10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY &

EMC

WITHSTAND VOLTAGE

I/P-O/P:1KVDC

ISOLATION RESISTANCE

I/P-O/P: 100M Ohms / 500VDC / 25°C/ 70% RH

ISOLATION CAPACITANCE

80pF max.

EMC EMISSION

Compliance to EN55022 Class B, FCC part 15 Class B

EMC IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8 light industry level, criteria A

OTHERS

REMOTE CONTROL

Power ON : R.C. ~ +Vin < 1VDC or open ; Power OFF : R.C. ~ +Vin > 4VDC or short

MTBF

600khrs min.MIL-HDBK-217F(25°C )

DIMENSION

21.8*9.2*11.1mm or 0.86"*0.36"*0.44" inch (L*W*H)

WEIGHT

4.8g

NOTE

1. All parameters are specified at normal input, rated load, 25°C 70% RH ambient .

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3.Line regulation is measured from low line to high line at rated load.

4.Load regulation is measured from 20% to 100% rated load.

5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.