powder shifter/food powder sieving machine

Main features                                                                                                                                                   

zs series vibrated filter is one of précised powder griddle,Low noise, high efficiency, need only 35 minutes  to rapidly replace the griddle, all closed structure. Used to filter particles, powder and mucilage.

1. High efficiency, refined design, duration,any powders and mucilage are suitable for using.

2. Easily to replace the net, simple operation and convenience washing.

3. Never jam the hole meshwork, no powder flying, filter size of the powder between 500 mesh and 0.028.

4. Discharge the impurity and coarse materials automobile and operates continuously.

5. Unique net flame design, long duration of net, only 3-5 to replace the network.

6. Small volume, move easily.

7. The highest layers of the griddle are about 5 layers. But 3 lagers are suggested

Working  Principle                                                                                                             

ZSseries vibrated griddle: use upright motor as the source of vibration,equipped eccentricity hammer on the both sides  of the top and the bottom, change circumrotate to level, upright and slope movement, then pass these three  movement to the surface of the griddle. Adjust the phasic angle on the both sides of the top and bottom to  change the movement orbits of the surface griddle.

Technical Parameter                                                                                                         

Main Parts                                                                                                                        

Company Information                                                                                                        

• As a oversea buyer, I wonder if you could send us engineer for installation and maintenance?

• The machines are test without problem before shipping. Just connect  to power the machine will work .We will always do our best  to solve your problem the whole lifetime of machine ,and oversea service is also available.

• I worry about there is a difference of supply voltage between our countries.

• Usually our power supply is 1P 220V or 3P 220-450V  50/60HZ,and we will confirm your supply voltage when we are going on business.

2. Strict QC process to make sure each product with good quality.

3. Various equipments to meet your need.