Mini Motorized Ball Valve Electric Actuator 2" 220v for Wat for Drinking Water Treatment Project

Specifications

Motorized Valve with 220Vac/50Hz
1.Open/close: 16S/50Hz
2.DN25 to DN100
3.Voltage: AC220V, AC110V, AC24V
4.OEM

CTF-Series Motorized Valve

Characteristic and performance:

New alloy material shell
Metal gear, large output torque
Active  and  Passive signals output
Voltage : AC 220V / 50Hz,AC12/24V
With manual function, with open/clsoe indicator.
Power : 14W
Working current: 300mA
Ourput torque : 40NM
Working pressure : 0 1.6Mpa
Temperature : 0 60 degree celsius
Open/close time: 10-15 secons
Wires: 4-6wires
Protection : IP67
Valve body : ball valve DN15-DN40    butterfly valve DN40-DN80
Valve material : UPVC, cast steel, cast iron, stainless steel

Feature

Series CTF actuators with its smart design, wonderful shape, are suitable for many kinds of vavles. It has proved its superior quality for its stable nature, and good quality. These actuators are return type and suitable to DC or AC (will be set in the factory), can be controlled by outside cut off.  This actuator run low cost and does not need to be maintained.

 DC or AC (should be set in the factory), control mode is flexible, convenient to microprocessor and realize the automatic control by PLC.
 Manual/electrically operated integrated design, Simply to operate.
 Large output torque, inner protecting overheated device, working stable and reliable.
 Low noise, good leak-proof. Through the coupling, the valve will be installed and operated    easily.