water treatment chemicals cation/anion/nonionic polyacrylamide

Specifications

Polyacrylamide PAM: Solid product appearance is white or slightly yellow powder, the liquid is a colorless viscous, easy soluble in water, decomposes when temperature exceeds 120 °C.

Anion polyacrylamide (APAM):The aqueous solution is polyelectrolyte,has the positive charge, may condense effectively to the aerosol organic colloid and the organic compound, and strengthen the 

li-quid-solid separation process.

Application: 1)Industrial waste water treatment; 2)Drinking water treatment; 3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory; 4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery; 5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.

Cation polyacrylamide(CPAM):Assumes the high polymer electrolyte in neutrality and  alkalinity medium special, is sensitive to the salt electrolyte.

Application: 1)Dehydrating silit; 2)Disposal of sewage and organic waste water; 3)Flocculant for water treatment in waterworks; 3)Oil field chemical; 4)Addictives for paper making etc.

Non-ionic polyacrylamide (NPAM): Mainly used as the flocculant, in oil industry, textile industry and 

paper making industry.

Application: 1)Sewage treatment agent; 2)Additives for textile industry; 3)Sand control and fixation; 4)Chemical grouting agent; 5)profile modification blocking agent for oilfield; 6)Humetants of oil etc.

Features: there is a positive group (-CONH2) in polyacrylamide molecules which can be adsorptive with the suspended particles in the solution, it has strong flocculation, Therefore PAM is widely used in water treatment, as well as metallurgy, paper, petroleum, chemicals, textiles, mineral processing and other fields. PAM used for sewage treatment, has a high efficiency of removing organic compounds in water, can not be replaced by other products.
Usage: Using morphology is 0.1-0.2 % aqueous solution, the water's PH should ≤7, PAM can be used for water treatment only, but also can be used in conjunction with PAC, but the two must be separated when mixing the two and you can increase the size of dosage according to respective situation.

Storage, transportation & caution:

This product is non-toxic in normal use conditions, no stimulation of the skin, stored in the ventilation and dry place, to prevent 

moisture.

Packing:

Cation/anion/nonionic polyacrylamide (25kg/bag, 500kg/bag, 1000kg/bag) is packed in two-layer bag with plastic bag for inner packaging, woven bag for external packaging or according to customers’ requires. Each 20ft container can load 20tons, with pallet can load 18 tons; Each 40ft container can load 26 tons either with pallet or not.

Notes and Caution/attention:

1, the operator should wear protective equipment, skin contact, or water wash.

2, using the on-site, usually rinsed with water to prevent slipping injuries.

3, this series should seal kept in a cool dry place.

Anion polyacrylamide specifications

Cation polyacrylamide specifications

Non-ionic polyacrylamide specifications