2014 Hot sale electromagnetic stirring alloy holding furnace

          Equipment function characteristics:

          1) Electromagnetic stirring and the solution without physical contact, do not pollute the aluminum solution, this in smelting the alloy with high purity metal has important significance.

          2) Can effectively solve the problem of uniformity of alloy composition, In some cases to reach the effect the workers won’t reach.

          3) Don't stir destroy the oxide layer, also don't need to open the oven door, so can reduce the oxidation slag, reduce the burning loss rate.

          4) Reduce the workers labor intensity.
 

          5) By changing the direction and strength of the magnetic field, can effectively regulate solution agitation reverse and stirring intensity.

          6) Using resistance heating efficiency, PID automatic temperature control, can effectively save the input power to reduce costs.

          7) One-time investment, use cost is low, save energy, enhance productivity.

          8) Operation and maintenance is simple and convenient.

          9) Workers can easy to master, operation is simple and convenient.

          Electromagnetic holding furnace

          1. Heating wire layout in ceramic radiant panel, no direct contact with aluminum liquid vapor, heating element service life is long.

          2. High degree of civilized production holding furnace itself no exothermic phenomenon, waste gas and noise

          3. Smart, compact structure, cover an area of an area small

          4. With special thermocouple measurement to aluminum water temperature, direct measurement aluminum liquid temperature, assure the temperatures of liquid aluminum real, and reliable.

          5. With the intelligent temperature control table, adopt fuzzy PID control technology, temperature control precision is achieved ±1°C.

           6.The electromagnetic stirring and liquid with no physical contact, do not pollute the liquid aluminum.

          7. It can effectively solve the problem of uniformity of alloy composition.

          8.Does not destroy oxide layer mixing, thus can reduce the oxidation slag, to reduce the burning loss rate.

          9.Stirring direction and stirring intensity can be adjusted

          10. A one-time investment, the cost is low, save energy, enhance productivity.