Energy saving 100t/h quick lime rotary kiln and plant

quick lime rotary kiln

Description for quick lime rotary kiln

Rotary Kiln are commonly used for heat processing of minerals and aggregates. rotary kiln is used for baking lime and dolomite in the steel factory and ferroalloy factory, especially lime ore.

XBM rotary kiln can maintain a uniform product temperature at the kiln entry, mid zone and discharge to achieve consistent quality results. In most rotary kilns, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently,our engineer pay more attention to the selecting of sensor,no matter the design, wavelength, and alignment.

They are all very important considerations, has greatly increased the value and high performance-price ratio of our  rotary kiln. The fuel for this can be gas, oil or pulverized coal.

 Working principle of quick lime rotary kiln :

rotary kiln is composed of cylinder, gears, support device, kiln liner and kiln tail sealing equipment, kiln head hood and combustion.
1) With a certain slope to the level, the whole lime rotary kiln body is supported by rollers and fitted with thrust rollers to control up and down movement of the kiln body.
2) Besides main driving unit for driving system, it is also fitted with the auxiliary driving unit so as to ensure the kiln body still can rotating when the main motor is powered off and prevent it from deforming.
3) The lime rotary kiln head adopts housing type sealing and kiln rear uses axial contact sealing unit so that reliability of sealing could be ensured.

What is the advantages of quick lime rotary kiln?

1.Our rotary kiln has advanced structure.
2.The vertical pre-heat with low-pressure loss can effectively improve the pre-heating effect.
3.The in-kiln decomposition rate of the pre-heated limestone can reach 20-25%.
4.The 10-15mm fine particle limestone materials can be directly used.
5.Rotary kiln has the function of degrading and re-using the waste.

Parameters of the quick lime rotary kiln:

 Pre-heater and quick lime rotary kiln:

Dust collector:

Six Reasons of Choosing XBM:

• International high quality certification product chain
• Manufactures, more reasonable price
• Solid technical support and after-sales service
• Uphold the principle of “Customer Supreme”( Balance payment after equipments run normally)
• One-stop service, customized exclusive project feasibility report
• Exports more than 50 countries and regions, good customers feedback