Rotary dryer for sawdust from China supplier

cordless rechargeable hair dryer

Rotary Dryer is mainly consisted of :

1) Furnace

2) Connection pipes between Coconut Shell Rotary Drum Dryer and furnace 

3) Feeding Device

4) Coconut Shell Rotary Drum Dryer roller ring

5) Big gear(45# steel)

6) Transmission parts ( Motor, Reducer, Bearing, Small gear)

7) Carrier Roller of Coconut Shell Rotary Drum Dryer

8) Discharing Device

9) Cyclone

10) Dust Remover

11) Air induced fan

 Features of air flow sawdust dryer                                              

1.Industrial drying machine is widely used in such industries as fodder, chemistry, medicine and mine.
2.The working process of industrial dryer machine goes like this: the moist materials whose water has been drained go into the dryer machine, under the rotation of the lifting board evenly installed inside the roller

drum, the materials will be evenly scattered inside the drying machine and carry out sufficient contact with

the hot air, thus accelerating the heat transfer and mass transfer.
3.In the drying process, under the lifting board with a certain inclination and the heat media, the materials

will move to the lower end of the dyer machine and be discharged.
4.Industrial dryer for sale is suitable for drying residue materials whose water content is below 85% such

as brewer’s grain, bean dregs, guniting corn bran, slurry and pomace, so that it has excellent effect for opening up fodder resources, reducing the feeding cost and reduce environment pollution.

 Working Principle of air flow saw dust dryer                                

Coconut Shell Rotary Drum Dryer is consist of heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation process, the Coconut Shell Rotary Drum Dryer should slopes slightly so that the discharge end of Coconut Shell Rotary Drum Dryer is lower than the material feed end in order to convey the material through the Coconut Shell Rotary Drum Dryer under gravity. Material to be dried enters the Coconut Shell Rotary Drum Dryer, and as the Coconut Shell Rotary Drum Dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the Coconut Shell Rotary Drum Dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of Coconut Shell Rotary Drum Dryer, passing through the hot gas stream as it falls.