Hot sale 80w LED Flood Light(CE,ROHS, PSE certification)

Specifications

Special Feature :

 1. Energy cost saving

  For its higher luminous efficacy up to 100Lm/w, 60-70% energy cost saving compared to the traditional HPS Lamps.

2. Instant ON/OFF operation

This is one of the superior features of LED lightings.You don’t need to wait for any second.

3. Warranty Policy

3 years warranty with original written warranty ; 20,000 switch cycles(on/off switching).

4. Low Light Loss

The light source is the low light loss and high-bright LED, which the loss is less than 5% in 10,000 hours.The aluminum back-side housing performs an excellent heat dissipation,which guarantees a lower junction temperature of the LED,thus slow down light loss.

5. Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Lead and Mercury.

6. High-brightness

Large-size square LED chip, and the light transmittance efficiency of the PC-cover can reach 95%.

7. Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.

8. Anti-vibration

Solid-state,anti-vibration, not easy to be broken.

Application :  

n      Recreation area lighting

n      Warehouse lighting

n      Sign lighting

n      Building lighting

n      Car park lighting

n      Perimeter fence lighting

n      Street lighting

n      Gas station lighting

Technical Specification :

Light distribution Curve ( IES File available, please contact us )

Drawing:

Caution & Warning:

1, To ensure the feature of water resistance , unauthorized person is not allowed to disassemble flood light construction .

2, The safety operating temperature is -40°C to +55°C . Make the product work in the circumstances with this temperature range . Otherwise the product will break down or components inside may have a shorter lifespan .  The average temperature on the product body is 40-50 deg.Celsius . It is suggested the product is installed beyond the hand touch on the metal body .

3, Don’t give a stress on the front surface of the glass with more than 0.2MPA/m²

4, Please make sure the electricity is powered off before the maintenance .

5.If any doubt about the installation or use of this product, consult a competent electrician or technician .