Milky Cover 5050 LED Grille Light

Specifications

Special Features:

1. Build-in Z –Diodes ( New technology )

    If one led fail , the remaining LEDs will still work

2.External Power supply with UL, PSE, TUV,SAA,etc .

3.Warranty Policy : 3 years warranty with original written warranty; 20,000 switch cycles(on/off switching).

4, Recessed mounting available

5.Low Light Loss

The light source is the low light loss and high-bright LED, which the loss is less than 5% in 10,000 hours.The aluminum back-side housing performs an excellent heat dissipation,which guarantees a lower junction temperature of the LED,thus slow down light loss.

6.Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.

7. Anti-vibration

Solid-state,anti-vibration, not easy to be broken. Can be recessed mounted or work as a pendant.

Application:                       

1, Office building lighting

2, Hotel lighting

3, Super market lighting

4, Warehouse market lighting

5, Airport lighting

6, Factory lighting

Technical Specification:

Caution & Warning

1.Use indoor or some place where no water.

2.Work under the fixed voltage.

3.Pls operate in the right way when you install the LED Grille light in case to avoid the power harm and body harm. When installing, please note the short-circuit protect such as the socket with the fuse.

4.  non-dimmable

5,  If any doubt about the installation or use of this product, consult a competent electrician or technician .