BBZ-MFP Plug-in Electromagnetic Flowmeter

Brief:

MFP plug-in electromagnetic flowmeter is a new type of fluid flowmeter developed on the basis of pipeline electromagnetic flowmeter . It obtains a volume of fluid flow with an electromagnetic method to measure the average velocity of fluidis according to Niculae magnetic (NIKURADS) principle on the basis of the reserved merits of Pipeline electromagnetic flowmeter, aiming to the defects of pipeline electromagnetic flowmeter, such as the installation difficulties on the pipeline and large cost and so on. electromagnetic method of measuring fluid to obtain a volume of fluid flow. In particular, plug-in electromagnetic flowmeter can be installed under the condition of non-stop (water) and on the cast iron pipes or cement pipes after the use of technology of hot tapping pressure installation.

Scope of products:

Plug-in electromagnetic flowmeter is composed of sensor and converter. It is used to measure conductive liquid like water, sewage, acid, alkali and other media, the conductivity required to be greater than 5μs / cm. It is mainly used for  measuring the instantaneous flow and volume flow on conductive liquid from medium-sized pipeline industries on tap water, oil and chemical, and is particularly suitable for flow measurement on metallurgy, paper and sewage treatment and other industries.

 Features:

 1) Easy to install, without drying up, a field hot tapping. Plug-in electromagnetic flowmeter has the absolute installed advantage and price advantage in large pipeline flow detection .

2) Suitable for water, sewage, acid, alkali and other liquid electrical conductivity above 5us/cm. The change of electrical conductivity does not affect the property .Have a strong adaptation to complex changes in the fluid, particularly for flow measurement of drainage pipeline.

3) Measurement accuracy up to indication value ± 0.5% ~ ± 1.0% (under reference conditions), It also can measure the forward or reverse flow in both directions, which provides a good tool for accurate flow measurement.

4) Wide versatility, strong interchange ability. Flow measurement is only related with the insertion depth. A model can be applied to a variety of fluid measurement requirements of pipelines.

5) Uses dual frequency excitation mode, without the impact of labor frequency, stable and reliable.

6) The converter has a good interchangeability and can achieve accuracy without having to reactual flow calibration.

7)Low-cut function. Users can set the lower limit voltage and flow rate to cut small interfering signal flow.

8)With a variety of protection class and installation, converters and sensors are applicable to diving installation.