grp square water tank

grp square water tank

Our product advantages

Using SMC material,which has the following characteristics
1. Sheet Molding Compound is a fiber-reinforced material, which consists primarily of a thermosetting resin glass fiber.
2. SMC is a high tech material that is used in the manufacturing process in most of our products ranges.
3. The advantage of SMC include, high impact compressive, flexural and tensile strength along with temperature stability.
4. SMC has low profile, low shrink for excellent surface appearance and painting.it's color pigmentable and has excellent chemical and electrical resistance varied to provide insulation, conductivity or anti static properties.

Characteristic of SMC water tank
1. It is the water tank of new type adopted in the world presently,and is assembled by wholly good  qualitied SMC plates.
2. Food grade resin is adopted,so the quality of water is good and clean ,without pollution, high     strength, light weight,corrosion resistant, nice appearance, long service life ,easy to     maintenance etc.
3. It is widely used in mine industry ,enterprises &public institutions,house,hotels, etc. and serves ad the water storage facility for drinking water,sewage water for treatment,water for fire     distinguish,and other water.
4. we can assemble water tank with volume from 1m3 to 1000m3.if the original water tank needs to be changed,housing is not needed to be modified ,so it possesses high suitability .sealing belt is especially studied for

fixed typed products,this kind of sealing belt is non-toxic ,water resistant,with high elastic property ,and fastened .Our water tank is with wholly high strength ,without leakage &deformation ,and is easy to maintenance.

Hebei Sinta FRP Products Trading Co., Ltd is specializing in FRP products.Our products mainly include water storage equipment, water treatment products, pultruded profiles/sections, cable/meter box protective boxes (distribution cabinets) and other FRP finished products, which is FRP water tanks, FRP chemical storage tanks, FRP pipes, FRP cooling towers, FRP grating, FRP pultruded profiles, FRP pultruded tubes, FRP rods, FRP boards, FRP sheets, FRP square tubes, FRP cable protective pipes, FRP cable distribution cabinets, FRP meter boxes, FRP ammeter boxes, FRP ladders, FRP gully grating, FRP manhole covers, FRP handrails, FRP capsule apartments, PVC cooling tower fills etc. 

Our factory

The factory has advanced production equipment to ensure product quality to meet standards, the company has sufficient inventory to ensure on-time delivery

Our market

From domestic to foreign countries, our sales network throughout many cities and regions, our products are well received in the market. At the same time, we continue to develop and research new products to meet customers' changing needs. We also attach great importance to environmental protection, to handle all the sewage drainage system, first-class treatment.

Packaging Detai:

Product packaging by the standards of each country.

Delivery Detail:Water tank leadtime within 30days

The water tank has been widely used in residential buildings, hotels, office buildings, R&D buildings, schools, malls, restaurants and other public facilities as well as places with high requirements for water quality, such as hospitals and food processing plants.

STEP-BY-STEP ASSEMBLY

TANKS FROM 1 TO 10,000M3 (260 – 2,500,000 USG)

Despite its’ great strength,GRP is lightweight just 1/3 one third the weight of an equivalent steel panel. All panels can be lifted by hand, with no special equipment required even where access is difficult, and installation can progress quickly and efficiently.

Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank. 
Step 7. Position and fix roof panels and if required, roof support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.