New Designed Auto Rendering Machine

Technical Date

ST-MW1321-800

ST-MW1321-1000

Usage of our plaster rendering machine:

1.Plastering the roof completely(no leave 1mm), and you can stop it at any position to add ash, which avoid the problem of landing ash.

2.With its unique function of changing the plaster board, rising the large angle, declining and sharpening the small angle, which can guarantee the verticality of metope with zero erro.

3.Making use of hydraumatic telescopic stem, you can fasten the machine less than 10 seconds. That's the fastest and easiest way.

4.The width of the plaster board designed on the basis of the door. In and out the room freely.

5.There are two mininature vibrators behind the plaster board, so you needn't worry about the quality of plastering the wall.

6.Equipping with omni-directional wheel, you can move it anywhere you want.

7.Its ingenious design much better than manual work.

Unique design of safety of our plaster rendering machine:

1.Before changing the plastering angle, the switch refuse to startup, then avoid the damage of scraping board.

2.If the motor reverse, it will cut the power automatically to protect the wire from mass. Commutate the switch is OK.

3.If it got stuck when descending, the machine can cut the power automatically to avoid wire sling clipping.

4.Long time exposure outside, the wire will become rough, so if it brokes, the machine will get stuck for abnormal descending speed.

5.All the machine accessories are from the most popular companies in the world.We can guarantee it must be a high quality,hihg efficiency,and strong technical one.

6.Although hydraulic oil looses, it will not down back for its front heavy. 

Application

- Application on brick or block walls

- Render cement mortar

- Render gypsum mortar

- Render lime mortar

- Render ready mix

Photo of Used