Fluoro-plastics Insulated Heat-Resistant Power Cable

Brief Introduction

The processing of fluoroplastic is not easy, but we successfully overcome this technical difficulty, and this material is used to make our fluoroplastics insulated heat-resistant power cable. Due to the superb stability of fluoroplastic, our product features stable electrical performance, and it is also resistance to acid, alkali, oil, corrosion, water, aging, corrosive gas, high temperature, etc.

Related Names

Electrical Cable Wholesaler | Flame Retardant Power Supply | Power System Component

Structure

Fluoroplastics insulated heat-resistant power cable

Application Properties
1. Rated voltage U0/U: 0.6/1kV AC
2. Max. working temperature: 200℃ for FEP (F46), and 260℃ for PFA.
3. Min. ambient temperature for working: -60℃ for fixed fluoroplastic or silicon rubber sheath, and -15℃ for the non-fixed laying
4. Ambient temperature for laying: ≥0℃ (≥-25℃ for fluoroplastic, silicon rubber and NBR sheathed cables)
5. Min. bending radius: 15 times of overall diameter for single core type, and 10 times of overall diameter for multi-core type.

Picture Reference

Model Explanation

Code Explanation

Standards
Q/321011KLA209-2009

Qualification
1. The DC resistance of this heat-resistant power cable is in accordance with GB 3956.
2. The insulation resistivity at 20℃ is higher than 500MΩ•km.
3. The end product is detected by the voltage withstand test, and it should not be damaged during the 5-minute-testing. Additionally, the test voltage is 3.5kV AC, and the frequency is 50Hz.

Applications
This fluoroplastics insulated power cable is used as the fixed power transmission and distribution line, or linking wire for motor. It offers stable electrical performance under high temperature, and it also shows the advantages of large current carrying ability as well as long lifespan. As a result, this product is widely accepted in the metallurgy, electrical industry, petrochemical field, large construction, automobile manufacturing and others.