China manufacturer SR2011 motorized threaded ball valve for air condition

Product description:

SR2011 motorized two-way valve or three-way valve is used in controlling the cold or hot water pipe on or off in air conditioning system, for the purpose of controlling room temperature. valve is driven by hysteresis synchronous motor, returned by spring. When the valve does not work, it’s in normally closed state, when it works, A opening signal is provided by thermostat, to make the electric valve connect AC power and become opening state, cold water or hot water flows into the fan coil, to provide cool air or hot air for room; once the room temperature reaches the setting point of thermostat, the thermostat will shut down the power of electric valve and the spring will return to make the valve closed, thus cutting off the flow of water into the fan coil. As the valve closed or open, room temperature is always maintained at the thermostat setting temperature range.

SR2011 motorized has two forms : two-way normally closed valve and three-way split valve, the sizes of valve threads are DN15, DN20, DN25 three type, according to their through-flow form and flow coefficient is divided into six models, S5 series is with auxiliary switch and used to control other devices to meet different needs.

SR2011 motorized two-way valve’s actuator and valve itself are installed by slip-on connection, So, the actuator can be installed after the valve is installed. Site assembly, easy wiring. Graphic design of the actuator is suitable for closing the wall, and small occupied space. The Product is reliability and durability, low noise, which can be installed inside the concealed fan coil unit and reliable work in the often high-temperature environment.

Features:

Forged brass body

Stainless steel seat, aluminum casing

Fully enclosed hysteresis synchronous motor, stainless steel spring

Body Connection thread: British standard flat thread (female thread) BSPP

North America used pipe thread (female thread) NPT

Motor power, low noise, light weight, easy to use, at the rated voltage frequency of the motor speed is not affected,

Remains constant, if the motor overload or stall, the motor coil will not burn

actuator and valve itself are installed by slip-on connection, which can be quickly and easily disassembled without any tools, so it’s easy to install and use

Technical Parameters:

Valve size: DN15, DN20, DN25

Connection: threaded connection

Valve structure: two-way, three-way

Media: hot / cold water

Pressure: PN20

Close differential pressure: 0.18 ~ 0.22Mpa

Power supply voltage: AC220V ± 10%, 50 / 60HZ

consumable power: <6.5W

Run mode: On or Off

Valve action time: Opening time: ≤18S Closing Time: ≤7S

Model and size