SR205 female thread motorized brass valve electric flow water ball valve

Product introduction:

SR205 electric valve is mainly used in central air-conditioning hot/cold water system, heating system, according to actual needs, to precisely control flow of cold, heat medium, the valve will avoid dramatic changes in temperature, to achieve purpose of real-time precise controlling temperature. The control valve is driven by single phase motor. Motor and thermostat connect by common terminal, starting terminal , closing terminal. Thermostat keeps constantly sampling, processing field data, sending control signals, to make the electric valve motor run or stop, when thermostat works, a opening signal is provided to electric valve which will act by AC power and open the valve, then frozen water or hot water will come into the fan coil to provide the room with cool air or hot air; Once the temperature reaches setting point, the thermostat will make he electric valve power-off then the reset spring makes the valve closed, thus cutting off the flow of water into the fan coil . Through the valve closed or open, room temperature is always maintained at the thermostat setting temperature range.

Features: straight-through flow, large flow, not blocking residue, KVS value is greater than the general two-way valve drive fully enclosed structure, has a good waterproof anti-dust function, valves hot / cold and environmental cold / heat transfer in less than actuators, actuator demolition, equipment is simple, can be installed in equipment, piping after installation, but also help improve the installation efficiency, since the actuator eccentric structure, the valve can be closed against the wall mounting pressure large, close strict, flexible valve open, can effectively prevent water hammer, the actuator can be equipped with two directions, after wiring and maintenance easier, automatic power-off valve operation in place click, click and longer life.

Technical Parameters:

Media: hot / cold water and 60% ethylene glycol

Specifications: DN15; DN20; DN25

Torque: 3Nm

Structure: Two-way

Run mode: On or Off

Power: 4W (during valve position change)

Valve action time: start / closing time: 20S ~ 25S

Material: Body: Forged brass optional nickel plated brass forging

         Ball: stainless steel

        Stem: Brass

Seat: glass fiber reinforced Teflon PTFE

Sealing: 3 EPDM the "O" ring with grease

Protection: IP65

Diagram:

OPENING STATUS                                                             CLOSING STATUS

model and size

1.100% factory price, because we are direct producer of ball valve, butterfly valves, check/non-return valves, gate valves and so on.

2.Market, technical support and after-sale service within 24 hours.

3. You can order your own configuration.

A: Manual     B: pneumatic   C: electric   D: bare shaft  E: disc with pin    F: disc without pin   G: double half shaft   H: one piece body   I: two pieces body  J: logo 

Fully welded ball valve - Company advantages:

1. We are factory:  We have strict quality control system and amounts of testing equipments for different kind of valve, such as size, pressure, working environment etc. also can provide the competitive price.  

2. Certification: API, CE, ISO,GOST, TS ..etc

3. Low MOQ:  Our factory owns the casting company by itself. We are always ready for providing the sample and producing some small orders, in order to meet the business well.

4. OEM Accepted: We can make the products with the client's demand standard or the customer requirement.

5. Complete Service: We are always ready to hear from you, reply within 12 hours.

6. Quick Delivery: We always keep the large stock for some hot products.

   undergound direct-buried full port full welded ball valve for gas

1.What's payment terms?   30% payment in advance, 70% balanced before delivery.  (if total value is USD$ 500, we suggest 100% payment in advanve.)

2.What's MOQ?   One set.    (if small size, we can check if free sample or not, freight need to be paid by customer.)

3.How control the quality of ball valve?

Select high quality raw material; Strict required during machining; Seat material comply with food grade; Tested twice to insure zero leakage; First copper plating disc, then nickle plating disc to increase the adhesiveness

4.Delivery time?

10-30 days after received the advance payment.  (if stock, about 10 days)