NAR6000Features

1. System boots in 20 sec
2. Support high capacity SATA HDD 500G/1T/2T
3. Optional SD card model, max 64GB
4. Expandable from 8 to 16, 24 and 32 channels
5. Touch screen operation
6. Optional model without touch screen (SD/HDD)
7. Remote control by network
8. Instant playback through speNAR5000er
9. Full embedded device, no PC required
10. Lower power dissipation supports 7x24x365 running

NAR6000 HDD Recording Hour /SD Recording Hour

1. 1.    500GB             36,000    Hour
2. 2.    1000GB(1T)        72000     Hour
3. 3.    2000GB(2T)        144000    Hour
4. 4.    8GB               560        Hour(SD Card)
5. 5.    32GB                  2240      Hour(SD Card)
6. 6.    64GB                  4480      Hour(SD Card)

Program System Requirement

1.   Windows7/Vista/XP/2000

2.    Pentium 400MHZ CPU

3.    256MB RAM

4.    1GB HDD

5.    Network RJ45 port

6.    Audio output (Play & Monitor)

PABX SMDR

There are 2 methods to gain the SMDR data from PABX

1.    RS232

2.    TCP/IP

User needs to analyze original data of PABX channel number, extension number from followed main parameters and input them to program setting.

Outbound call

1.    Call symbol: The mark to distinguish the call type (Outbound/Inbound call) in character string. Most PABX show “TO “ to indicate outbound call. 

2.    Extension position: User have to count the extension number starting position in character strings.

3.    Extension number length: Extension number length.

4.    PABX channel number position: User has to count the channel number starting position in character strings.

5.    Channel number length: PABX channel number length.

From followed example, user can read out outbound call information

1. Call symbol: $TO
2. Extension position: 14^th
3. Extension number length: 2.
4. PABX channel position: 24^th
5. Channel number length: 2

PABX SMDR Protocol

Please refer PABX user’s manual about serial communication configuration for windows HyperTerminal operation

Gain SMDR data through TCP/IP

Most PABX support TCP/IP SMDR. Please refer PABX user’s manual about SMDR output parameter.

1. 1.     PABX IP address:  The IP address assigned to PABX
2. 2.     Connect Port: Port for PC connection (Provided by PABX)
3. 3.     Output Port: Normally it is same as connection port. Otherwise, user can set separately.
4. 4.     User Name: User name to login PABX.
5. 5.     Password: Password to login PABX