Low Price Good Quality Three Cylinder Drying Equipment for Wood

Introduction of Three Cylinder Drying Equipment for Wood

Rotary Dryer for Silica Sand Production Line is made up of three different diameter homocentric cylinder according to the certain mathematical relationship and cylinder structure then comminuted by embedded with each another. Because of the three-cylinder dryer special structure, the length of the cylinder body is the single cylinder dryer one third. This dryer adopts roller and belt friction transmission, has a low power transmission and reduces the noise of equipment. 

Features of Three Cylinder Drying Equipment for Wood  

1. With high technical content, cylinder self insulation, thermal efficiency is as high as 80% (single cylinder dryer is only 35 percent), thermal efficiency than single cylinder drying saves coal 68 percent, yields 100%.

2. Compared to single cylinder dryer the machine length shortens 60%, in favors of process arrangement. Reduces workshop covered area, saves the project investment by around 40%.

3. Heat-resisting wear-resisting alloy steel plate, four times than ordinary steel wear-resisting. Long service life and easy maintenance.

4. High thermal efficiency, outside shell temperature below 60 °C (single cylinder dryer outside shell temperature as high as 150°C), output of low temperature, discharging temperature below 60 °C.

5. Output of low temperature, be helpful for dust removal equipment to use a long time, can be directly supporting air tank pulse bag filter.

6. Construction investment reduces 50% or so, power consumption reduces 60%.

7. Don't need sizes of gear-driving, and adopts roller rotation

8. Hot air stove can supporting fluidized bed, spray stove, hands burned furnace, also used in fuel and gas type, can bake the below 20 mm pieces of materials, aggregates, powder material.

Technical parameters of Three Cylinder Drying Equipment for Wood  

Pictures of Three Cylinder Drying Equipment for Wood  

1.Install and debug the equipment;

2.Send the first-line operators on site;

3.Examine the equipment regularly.

Our company and products

Contacts