High Grade Structural Silicone Sealant

Specifications

J-8688 High Grade Structural Silicone Sealant

The Main Uses

1.Bonding and sealing for glass,aluminium plate,stone material and aluminium-alloy each other.

2.Bonding for the glass of dot-type curtain wall and exposed frame curtain wall

3.Bonding and sealing for big flat glass and glass of day-lighting ceiling.

4.Secondary sealing for hollow glass.

Characteristics

1.One component,RTV-1,neutral and room temperature curing.

2.Special for structural engineering and high modulus.

3.Excellent adhesion.

Limitation of Usage

1.Unsuitable for the continually water immersion and long time underground joints.

2.Do not used on material containing grease,plasticizer,solvent and vulcanized rubber.

3.Unsuitable for the frosty or moist surface and the place of mechanical wear and tear.

4.Unsuitable for the surface of insulating glass and porous stone.

Methods of Application

1.Clean the joint by using solvents such as toluene or acetone and keep the joint dry.

2.Stick a adhesive tape on the part where need protection,but the adhesive tape do not contact construction surface.

3.Trim the overflowed sealant before it is cured in order to keep a perfect appearance.

Storage

12 months shelf life if stored below 27°C in cool, dry places.

Application Standard

GB/T 16776-2005

Statement

Information published in this instruction is correct. However, by no means can it be considered an absolute guarantee, as usage and application of the product in accordance with the instruction given and success in application is beyond our control and is depend on many factors. Customers should have a good knowledge of product and make independent judgments of optimal usage before application.We do not make any expressed and implied guarantee except that the product conforms to relevant standard.The only compensation is return or change of goods.We make a definite statement that we do not be responsible for any occasional and additional loss.