Chlorine Dioxide Generator For Swimming Pool Disinfection

chlorine dioxide generator

Introduction:

YM series chlorine dioxide generator is my company in the thorough study of domestic and foreign similar products based on advanced technologies, after many years of exploration, innovation and practice, using the latest techniques and special high quality materials developed by. This product has advanced technology, operation convenience, easy maintenance, low operating cost, service life long, the comprehensive performance marked characteristics in the domestic leading level. This equipment is widely used in drinking water, swimming pools, water, hospital wastewater disinfection; Industrial cooling water sterilization alga; Industrial wastewater decoloring, deodorant and remove reducing pollutants.

Specifications and types of composition and representing significance:

Generator per hour of equipment specification according to the chlorine-antiseptic yield (g/h) to differentiate, for example: YM - 1,000 refers to economical series products, rated asia-pacific forum every hour for 1000 grams chlorine-antiseptic yield.

Environment of use and working conditions:

Setting place: indoor (well ventilated)
With water: 25, hydraulic pipe diameter DN p 0.2-0.4 MPa, : traffic Q p 2 cubic meters/hour.
With power: AC220V, 50HZ; Power 1KW

Structure and working principle:

Overall structure: generator have material feeding system and reaction system, absorption system and safety system structure. Generator shell for PVC material.
Working principle: sodium chlorate aqueous solution with hydrochloric acid by negative pressure conditions in the feeding tube material box, dripping with valve into reaction chamber, fully and reaction, output by chlorine dioxide gas for the main ingredients of  disinfection, via water absorption and water shoot fully mixing is formed after disinfection, access to water was disinfected. 

Equipment installation:

 
1, equipment should be installed in the interior, avoid direct sunlight, equipment working environment temperature request 5 °C to 40 °C.
2, because strong corrosive chlorine, so in choosing equipment installation position with other electric equipment should be avoided in the same room, should be established disinfection, via water absorption and water shoot fully mixing is formed after disinfection, access to water was disinfected.

Equipment parts schemes and illustration:

Serial          parts                                                 function

number       name                                
1        level gauge                                         shows raw material box level 
2        drops add valve                                 adjusting raw material dosing quantity
3        raw material dosing valves               open or turn off the raw material, KaiTingJi when used
4        suck feed tube                                   add sodium chlorate solution and hydrochloric acid solution to use
5       unicom valve material box,                absorb charge absorb charge open when end closure

6     exhaust valve material box,                 absorb charge absorb charge when closed end to open
7       the outlet                                              check back exports and prevent water chlorine into equipment inside
8       the outlet valve absorb charge          only in raw material box when closed
9       drain valve                                           when cleaning of the residual liquid discharge reactor
10     discharging valve row materials.      In the box net materials

11      the relief valve                                    equipment operation not the specific pressure at approach
12      water mouth                                        water heating tanks mouth
13      outfall                                                   heating tanks drain
14      heating window
15      inlet                                                      equipment in operation of air passage

                          Why choose us

1.Long history , companying with good reputation

2. Good quality control system , Huge financial resources invested, Management System Systematized, and service personalized, which will be our goal and persistent forever. 

3. Huge market overseas . Our machines have been sold all over the world . especially Africa, Europe, Asia, and North America. Clients over many countries like Australia, Sri Lanka, UK, America, Mexico, Peru, Brazil, Kenya, Tanzania, Saudi Arab, UAE, etc.

4.Equipment working site , You are welcomed to visit our factory, the machines can be operated on site, and you will master the usage of machines nearby.

5. After-sales:

(1) 24 hours we are ready to explain question for you.

(2) Professional engineers supported, along with strong technical service.

(3) Excellent after-sales service.

(4) Any problem can be solved without influence products schedule of customers.