RHL160 HLD(170~960) build in printer digital portable aluminum hardness tester

RHL160
 3 Inch LCD,or LED Display, High precision portable hardness tester, Mutifunction  Portable Hardness Tester

Main Application

• Die cavity of molds
• Bearings and other parts
• Failure analysis of pressure vessel, steam generator and other equipment
• Heavy work piece
• The installed machinery and permanently assembled parts
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic materials
• Rapid testing in large range and multi-measuring areas for large-scale work piece

Features

• 3 inch LCD,or LED display
• Wide measuring range. Based on the principle of Leeb hardness testing theory. It can measure the Leeb hardness of all metallic materials.
• Large screen(128×64 dot matrix LCD), showing all functions and parameters.
• Test at any angle, even upside down.
• Direct display of hardness scales HRB, HRC, HV, HB, HS, HL.
• Seven impact devices are available for special application. Automatically identify the type of impact devices.
• Large capacity memory could store 500 groups (Relative to average times32~1 ) information including single measured value, mean value, testing date, impact direction, impact times, material and hardness scale etc.
• Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
• Battery information indicates the rest capacity of the battery and the charge status.
• User calibration function.
• Software to connect with PC via USB port.
• With EL background light.
• Thermal printer integrated, convenient for in field printing.
• NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 150 hours (EL off and no printing).
• Auto power off to save energy.
• Outline dimensions:215mm×85mm×42mm

Parameters

• Measuring range:HLD(170~960)HLD
• Measuring direction:360°
• Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS
• Display:dot matrix LCD,128×64 dots
• Data memory: 500 groups max.(relative to impact times 32~1)
• Printing paper: width is (57.5±0.5)mm, diameter is 30mm
• Battery pack: 6V NI-MH
• Battery charger: 9V/500mA
• Continuous working period:about 150 hours(With backlight off, no printing)
• Communication interface:USB1.1
• Working temperature: -10°C~+50°C;
• Storage temperature:-30°C~+60°C;
• Relative humidity: ≤90%;
• The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust

• Testing Range

  Material	Method	Impact device
  		D/DC	D+15	C	G	E	DL
  Steel and cast steel	HRC	20~68.5	19.3~67.9	20.0~69.5		22.4~70.7	20.6~68.2
  	HRB	38.4~99.6			47.7~99.9		37.0~99.9
  	HRA	59.1~85.8				61.7~88.0
  	HB	127~651	80~638	80~683	90~646	83~663	81~646
  	HV	83~976	80~937	80~996		84~1042	80~950
  	HS	32.2~99.5	33.3~99.3	31.8~102.1		35.8~102.6	30.6~96.8
  Cold work tool steel	HRC	20.4~67.1	19.8~68.2	20.7~68.2		22.6~70.2
  	HV	80~898	80~935	100~941		82~1009
  Stainless steel	HRB	46.5~101.7
  	HB	85~655
  	HV	85~802
  Grey cast iron	HRC
  	HB	93~334			92~326
  	HV
  Nodular cast iron	HRC
  	HB	131~387			127~364
  	HV
  Cast aluminum alloys	HB	19~164		23~210	32~168
  	HRB	23.8~84.6		22.7~85.0	23.8~85.5
  BRASS(copper-zinc alloys)	HB	40~173
  	HRB	13.5~95.3
  BRONZE(copper-aluminum/tin alloys)	HB	60~290
  Wrought copper alloys	HB	45~315

   

   Configuration
  

• 	No.	Item	Quantity	Remarks
  Standard Configuration	1	Main Unit	1
  	2	D type impact device	1	With cable
  	3	Standard test block	1
  	4	Cleaning brush (I)	1
  	5	Small support ring	1
  	6	Battery Charger	1	9V 500mA
  	7	Paper for printing	1
  	8	Manual	1
  	9	Instrument case	1
  Optional Configuration	11	Cleaning brush (II)	1	For use with G type impact device
  	12	Other type of impact devices and support rings		Refer to Table 3 and Table 4 in the appendix.
  	13	DataPro software	1
  	14	Communication cable	1