First choice biomass wood pellet making machine

First choice biomass wood pellet making machine

Description of wood pellet making machine

Raw materials of  wood pellet making machine are rice husk,peanut shell,corn stalks,corn cob,cotton stalks and other solid scrap material.

After crushing,pressing,densify,molding, biomass wood pellet making machine  makes raw materials small solid pellet virgulate fuel.

Biomass pellet fuel has a large calorific value, high purity,small volume and the biomass pellet fuel is renewable energy which is easy to store and transport.

Attractive advantages of wood pellet making machine

1. Adopt gear transmission, speed reducer, with two direction rotation, low noise, so extend the working life of gear.

2. Molding pressing density can be adjusted,from 0.8-1.4 g/cm3

3. Luoyang bearing is adopted for the bearing.

4. The roller and die are made of high grad complex alloy steel 40 Cr, which extends the usage life 5-7 times longer. Through the special heat treatment, the abrasive resistance is much better than 45# Steel.

5. The wood pellet mill adopts special high-quality materials and advanced coupling shaft drive device.

6. Vacuum heat treatment is adopted for the roller, die, roll axle, main spindle. This method is better than the general Carburizing and quenching process.

7. The parts are in a sealed room from the top and end, solving the problem of plastic electrostatic adsorption.

8. The feeding hopper use a whole metal plate, the hemming and hopper edge pressing is strong than the welding structure.Besides, the material use the galvanized sheet, can protected well against the rust.

9. Through the trials on more than 200 materials (such as the sawdust, rice bran, peanut husk), we got the the best compression ratio of the dies.

10.Good quality of the electric controller, adopt the Electrical components of CHINT and Siemens etc. More safer, more durable. The circuit of the electrical controller is lay outed according to the CE standard.

Technology parameter of wood pellet making machine

Structure of wood pellet making machine

wood pellet making machine is made by molding host,feeding conveyor,material conveyor,control cabinet etc.

According to the requirements of buyers,our factory also provide supporting equipments of a production line of pelleting process,such as mixing system,drying system,cooling systems,packaging systems etc.

Application of wood pellet 

wood pellet which made by our biomass wood pellet making machine  is widely used in heating, life stoves, hot water boilers, industrial boilers, biomass power plants, etc.

Package of wood pellet making machine

Kindly note:

Raw materials moisture content:15-18%

Material length less than 3mm 

Any problems about our wood pellet making machine, please don't hesitate to inqury!