2016 Newly WiFi XTOOL iOBD2 Interface Scanner OBD2 Car Diagnostic Tool Multi-language iOBD2 WiFi wireless obd2 scanner

IOBD2 For Iphone

 Introduction

IOBD2 is an app for your car. It turns your iPhone/iPod into an advanced display for your engine data.
Now you do not need to drive on with the MIL light on.
Now you do not need to wait to go to the garage with your car to know what is wrong.
Now you can prepare the garage staff in advance by knowing what is wrong with your car.
Now you can see what is wrong with your car on your holiday so that you know if you can drive on.
Now you can know what your fuel consumption, torque, or acceleration is, in real time.
Now ever wished you had your own customizable gauges, showing only the data you were interested in.
 
Please verify that your vehicle is OBD-IIEOBD compliant before purchasing

Get the benefit of multiple gauges without the overwhelming clutter and the expense!
Note: Not all OBD-II compliant vehicles will have support for all of these parameters
 
Performance gauges:

- Engine speed
- Corrected vehicle speed
- Open/closed loop
- Boost/vacuum combo gauge
- Acceleration and braking
 
Fuel economy gauges:

- Inst. fuel economy
- Avg fuel economy

Engine gauges:
- Timing spark advance
- Engine coolant temp.
- Intake air temp.
- Ambient air temp.
- Manifold absolute pressure
- Mass air flow
- Fuel trims, short and long term
- Percent engine load
- Catalyst temp.
- Fuel pressure
- Lambda gauge
- Air/fuel ratio
 
Function:

Diagnostic

The Diagnostic function includes:

Read DTC
Read the current DTC that engine has stored, and DTC info.
Clear DTC
Clear all the current DTC.
Live data
Read all the running parameters that related to the ECU.
Freeze frame data
OBD system will record the system running parameters related to the malfunction the moment when it occurred at the same time when it set the DTC. And this group of data is called freeze frame data.
Readiness test:
Readiness reflects the status that all the valid diagnostic functions. The diagnostic functions are referring to the important monitoring functions in OBD system, e.g.  sensor monitoring,  sensor heater monitoring, and EGR system monitoring, etc. These diagnostic functions are closely related to the engine emission control.
Read vehicle info
Read vehicle info such as Vehicle Identification Number VIN, Calibration IDs CALID and Calibration Verification Number CVN
Sensor test
This service is to allow access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of [Mode 6 test].
Mode 6 test
This service is to allow access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalyst monitoring and the evaporative system monitoring.
EVAP System Test
The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.
 
My dashboard
The My dashboard function includes:
Idle mode engine rotational speed ,water temperature,battery voltage,Air-intake temperature,Instant  fuel consumption static,average fuel consuption ,Ever wished you had your own customizable gauges, showing only the data you were interested in
Cruise mode vehicle speed, The current engine load, water temperature, Vehicle travel time, vehicle travel average speed, Continuous running mileage, instant fuel consumption dynamic,Ever wished you had your own customizable gauges, showing only the data you were interested in.
Sport mode: engine rotational speed, vehicle speed, water temperature
 
Performance test
The Performance testfunction includes:
Accelerate/Decelerate test: Test acceleration deceleration process time and distance
0 to 400m acceleration test: test spend time from 0 to 400 meters.
 
Diagnostic software updating
Users can find out the latest software release info, downloading and installing procedures info by logging on to app store.
 
History
Record DTC, live data, freeze frame data,my dashboard data. And you can share the record what you get from the car by IOBD2 on Twitter and Facebook.
 
Emissions Testing:
- Read and clear diagnostic trouble codes
- IM Readiness status
 
Components
The hardware includes: iOBD2 unit
The software includes: iOBD2 client software,you can source iobd2 software and download it from apple store