logo projector

Specifications

   logo projector

1 What is led Ghost shadow light?

The Ghost shadow light is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;

The dazzle logo light will display on the ground when you open the car door ,and will turn off when you close the door;

It can be installed in both left and right door.Courtesy door light make your car artistic moreover the atmosphere.

Embedded type design will not destroy the original car appearance.

 2 Applicable models:

BMW,Honda, Mazda, Toyota, Lexus,Nissan, Kia, Hyundai, Volkswagen,Buick, Ford, Jeep, Porsche, Lamborghini,
Ferrari, unlimited,HKS, ABT, IIIM, Harman,AMG, JP, GARSON, FOX, King Kong and so on. About 200 models for you choose. Can be customized logo.  

3 How to Install into the car?

1 This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;

2 Pull down the inside door board first. Mark the suitable location for drilling a hole.

3 Drill the hole on the door board with our borer .

4 Inset the product from the bottom of car door ,then arrange the power cord.

5 Install the nut through the power cord upon the hole inside; Tighten the nut;

6 Connect the power cord according to the installation guide;

7 Adjust the lamp projection to the suitable place with wrench tool.

8 Reinstall the inside door board,then check the final effect.