wireless plug and play led door logo laser light welcome light

wireless plug and play led door logo laser  light welcome light

1 What is led Ghost shadow light?

 The Ghost shadow light is specially designed for auto modification fancier; we purpose to bring more driving fun to drivers;

The dazzle logo light will display on the ground when you open the car door ,and will turn off when you close the door;

It can be installed in both left and right door.Courtesy door light make your car artistic moreover the atmosphere.

Embedded type design will not destroy the original car appearance.

Old generation Logo door light(need to drill but its logo is focus)

 2 Applicable models:

BMW,Honda, Mazda, Toyota, Lexus,Nissan, Kia, Hyundai, Volkswagen,Buick, Ford, Jeep, Porsche, Lamborghini,
Ferrari, unlimited,HKS, ABT, IIIM, Harman,AMG, JP, GARSON, FOX, King Kong and so on. About 200 models for you choose. Can be customized logo.  

3 How to Install into the car? (for old generation logo door light)

1 This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;

2 Pull down the inside door board first. Mark the suitable location for drilling a hole.

3 Drill the hole on the door board with our borer .

4 Inset the product from the bottom of car door ,then arrange the power cord.

5 Install the nut through the power cord upon the hole inside; Tighten the nut;

6 Connect the power cord according to the installation guide;

7 Adjust the lamp projection to the suitable place with wrench tool.

8 Reinstall the inside door board,then check the final effect.