Omron sensor E3JK-R2M1 Omron Relay Output Retroreflective Photoelectric sensor

Specifications

<p>Omron sensor E3JK-R2M1 Omron Relay Output Retroreflective Photoelectric sensor <br>E3JK-R2M1 2M ;Retro-reflective Type With M.S.R. Function , Pre-Wired Type , Sensing Distance 2.5m , Light ON Output , Relay Output <br>Japan Photoelectric sensor <br>Sensing method: Through-beam <br>Sensing distance:0 to 5 m&nbsp; <br>Standard sensing object :Opaque: 14.8 mm dia. Min. <br>Directional angle Emitter:3 to 20 DEG<br>Receiver:3 to 20 DEG <br>Light source :Infrared LED (950nm) <br>Power supply voltage :12 to 240 VDC -10% to 10% (ripple(p-p) :10% Max.) 24 to 240 VAC -10% to 10% <br>Power consumption Emitter and Receiver: 3W DC Max.<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Emitter and Receiver: 3W AC Max. <br>Control output (Output type) :Relay output <br>E3JK-5M1 2M:Through-Beam Type , Pre-Wired Type , Sensing Distance 5m , Light ON Output , Relay Output;<br>E3JK-5M2 2M:Through-Beam Type , Pre-Wired Type , Sensing Distance 5m , Dark ON Output , Relay Output;<br>E3JK-5M2 5M:Through-Beam Type , Pre-Wired Type , Sensing Distance 5m , Dark ON Output , Relay Output;<br>E3JK-DS30M1 2M ;Diffuse-Reflective Type , Pre-Wired Type , Sensing Distance 300mm , Light ON Output , Relay Output <br>E3JK-DS30M2 2M ;Diffuse-Reflective Type , Pre-Wired Type , Sensing Distance 300mm , Dark ON Output , Relay Output <br>E3JK-R2M1 2M ;Retroreflective Type With M.S.R. Function , Pre-Wired Type , Sensing Distance 2.5m , Light ON Output , Relay Output <br>E3JK-R2M2 2M ;Retroreflective Type With M.S.R. Function , Pre-Wired Type , Sensing Distance 2.5m , Dark ON Output , Relay Output <br>E3JK-R4M1 2M ;Retroreflective Type , Pre-Wired Type , Sensing Distance 2.5m , Light ON Output , Relay Output <br>E3JK-R4M2 2M ;Retroreflective Type , Pre-Wired Type , Sensing Distance 2.5m , Dark ON Output , Relay Output </p><p>&nbsp;</p><p>Control output (Load current) 0 to 3 A <br>Life expectancy (relay output) Electrical: 100 thousand times or more(switching frequency 1800 times/hour)<br>Mechanical: 50 million times or more(switching frequency 18000 times/hour) <br>Operation mode Light-ON <br>Load power supply voltage 5 VDC Min.<br>250 VAC Max. <br>Response time 30 ms Max. <br>Sensitivity setting - <br>Ambient illuminance Incandescent lamp:3000 lux Max. <br>Ambient temperature Operating: -25 to 55 CEL<br>Storage: -30 to 70 CEL<br>(with no icing or condensation) <br>Ambient humidity Operating: 45 to 85 %RH<br>Storage: 35 to 95 %RH<br>(with no condensation) <br>Insulation resistance 20 M OHM Min. at 500 VDC between charged parts and the case <br>Dielectric strength 1500 VAC at 50/60 Hz for 1 minute between charged parts and the case <br>Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions <br>Shock resistance 500m/s2 for 3 times each in X, Y, and Z directions <br>Degree of protection IEC60529: IP64 <br>Applicable standard (EC Directive (Low Voltage Directive)) EN60947-5-2 <br>Applicable standard (EC Directive (EMC Directive)) EMI: EN60947-5-2<br>Emission Enclosure: EN55011 Group 1 classA<br>EMS: EN60947-5-2<br>Immunity ESD: IEC61000-4-2<br>Immunity RF-interference: IEC61000-4-3<br>Immunity Burst: IEC61000-4-4<br>CE marking: Equipped <br>Connection method Pre-wired models (Cable length: 2 m) <br>Indicator Light indicator(red), Power indicator(red) <br>Mass (packed state) approx. 420 g <br>Material (case) ABS <br>Material (lens) Methacylate resin <br>Material (mounting bracket) Iron <br>Accessories Instruction manual, Mounting bracket(with screws), Nut</p>