With RS - 485 interface compressed air flowmeter

With RS - 485 interface compressed air flowmeter
Corrugated cardboard boxes outer and foam paper inner packing size: 4x5x14cm

With RS - 485 interface compressed air flowmeter  

  1.specification

Description of with RS - 485 interface compressed air flowmeter :

MF series flow sensor technology and intelligent electronic control technology, specially designed for ordinary small amount of gas flow measurement developed product. The sensor can directly measure gas mass flow rate, low pressure loss. Applicable to purify air or nitrogen gas flow measurement, can also be used for environmental monitoring instrument, such as air sampling and analysis instrument 9 gc spectrometer) DFS/DMF flow sensor, pipe diameter is 3 mm, low cost, small pressure loss, measurement range to five biggest SLMP, suitable for particle counter and analysis instruments, etc. With RS - 485 interface DFS/DMF flow sensor, measurement range to 800 largest SLPM. Can be used for air flow measurement and control equipment. Application in the medical oxygen, clean gas measurement, such as: air sampler, gas analyzer, etc.

Features of with RS - 485 interface compressed air flowmeter :

1. No mechanical moving parts, corrosion resistance, stable and reliable, long life, long running     without special maintenance;

2. Using 16-bit single chip, high integration, small size, good performance, the whole machine       function is strong;

3. The intelligent flowmeter flow sensor, microprocessor, pressure, temperature sensor, adopt     built-in combination, make the structure more compact, can directly measure the fluid flow,     pressure and temperature, and automatic tracking compensation and real-time compression       factor correction;

4. Effective improve the double detection technology can detect the signal strength, and               restrain  the disturbance caused by pipeline vibration;

5. Using Chinese characters dot matrix display screen, display digits, more intuitive reading           convenient, can be directly display the working status of traffic volume, the standard               conditions, the total volume flow, parameters such as pressure, temperature and medium

6. Block using EEPROM technology, convenient parameter Settings, can be permanent, and         can save up to a year of historical data

8. Cooperate with our company FM type data collector, can through the Internet or telephone       network for remote data transmission;

9. The transmitter input pressure and temperature signal, strong interchangeability

10. The machine power consumption is low, can be used in batteries, also can be an external         power supply

 

Detailed parameters of  compressed air flowmeter

1: measurement range; 0.2-20 ml/min per 0.5-50 ml/minute, 2-200- ml/minute, 5-500-                ml/minute, 10-1000-ml/min per multiple range (optional), 0.1-10 litres/minute, 0.2~ 20              litres/minute, 0.3-30 liters perminute, 0.4-40 litres/minute, 0.5-50 litres/minute, 4-200               itres/minute, 16-800 litres/minute

2: interface specifications; R1/4, BSPT1/4, 4 mm and 6 mm, 8 mm, 12 mm quick connector       (optional, can be processed according to the requirement)

3: power supply mode; 8 to 18 VDC

4: precision; 1.5%, repetitive; + - 0.075%,

5: output; Linear, 0.5 4.5 V/analog 4 ~ 20 ma/RS - 485

duct picture 

 

 

 

 

 

4.packaging&shipping