1.75mm ABS Filament White for 3D Printer

Specifications

1.75mm ABS Filament White for 3D Printer

Standard Packing of ABS Filament: spool 1kg etc.

Standard Color of ABS filament: black, white, red, green yellow, etc. any color is ok.

All  ABS filaments are Grade A.

Grade A: 100% virgin material.

ABS is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2)density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc.

Colors of ABS Filament and PLA Filament 

    Natural, white, black, red, sky blue, dark blue ,florescent green, dark green, florescent yellow, dark yellow ,orange, purple, pink, grey, brown, glow in dark etc.

Order quantity from factory:
We have 3 to 10 tons in stock each month, about 50-100kg of each kind .
when you can order one material(PLA or ABS), one  color (natural, white, black, red, green, yellow, orange, blue, purple, grey),one diameter(1.75/3.0mm), minimum quantity 100kg, you can get the best factory price, you can start from natural, white, black, since these three colors are sold well.

Quality is a top priority! All of our products receive a full quality assessment as part of our production process. We run analysis on melt index, strength, elasticity as well as testing impact tolerances. We also have a full research and development department. This group is ready to modify/improve the properties of our standard products to match your company's specific needs.

Diameter Continuance Control of ABS Filament and PLA Filament

    Control PLA and ABS filament diameter continuous, concern about the cooling water ,temperature is warm or cool, each plumbing flowing water temperature is stable the same or different ,etc, much factors will affect the diameter continuance.

      We build quality control system, that we buy 3D printer in office to test each produce batch filament, include PLA and ABS ,to make sure each one is qualify printing on 3D printer.

Pictures:

Effects Display: