GPON OLT

Specifications

specification:

1)inculding 2 power cards, the model is PRWG.
2)One uplink cards, the model is GUFQ

3)including 2pcs module . 
4)Exchange control boards, 2 pieces, the model is SCXM.
5)1 piece 8-port GPON card, the model number is GTGO, including 8 modules(bidi 20KM SC Class B+).
6)Two black power cables; an RJ-45 first turn 9-pin RS-232 female network cable; one RJ-45 cable

ZXA10 C300 Datasheet

ll rights reserved

In the face of increasing demands for high bandwidth and multi-play services, operators have to make a balance between economy and mass roll-out. How to smoothly evolve from FTTC, FTTB and FTTCab to FTTH is a challenge in front of telcos nowadays. Operators are considering building a PON network that is green, futureproof and saves TCO.

Key Features Technical Specifications

All rights reserved

• Subscriber Card Density

_ GPON card: 8 ports per card

_ EPON card: 8 ports per card

_ P2P card: 16 ports per card

_ 10G EPON card: 4 ports per card

• Uplink interface card

_ 4*10GE uplink per card

_ 4*GE uplink per card

_ 1*STM-4/OC12 or 2*STM-1/OC3 TDM Uplink per card

_ 32* E1/T1 uplink card (balanced and Unbalanced)

• Environment monitoring card

_ 2 * Hz/Bit external clock interfaces

_ 5 * Environment monitoring interfaces

_ PON Features

• EPON compliant with IEEE 802.3ah

• GPON compliant with ITU G.984.x

• 10GEPON compliant with IEEE 802.3v

• Support up to 1:128 optical split ratio for GPON, 1:64 optical split ratio for EPON and 1:256 optical split ratios for 10GEPON

• Support OLS (Optical Laser Supervising)

• Physical reach: 20~60km

• Highly-efficient DBA: NSR-DBA, SR-DBA

• 1PPS+TOD, IEEE 1588V2

• Transceiver power: Class B+ or class C+

• Type B and type C optical link protection

• FEC

• AES128

• SCB

_ L2/L3 Features

• 1:1/N: 1 VLAN

• 802.1ad, SVLAN, Selective QinQ, VLAN Stacking

• Line-speed forwarding

• STP/RSTP/MSTP compliant with IEEE802.1d/802.1w/802.1s

• Link aggregation IEEE 802.3ad

• DHCP server, DHCP Relay (option 60/82), DHCP proxy

• L3 routing:

• RMON II

• Multicast – IPTV

• QoS

• Queue & scheduling mechanism: SP,DWRR, SP+DWRR

• IPv4 DSCP Diffserv

• Stream classification, rate limiting, Shaping and priority setting

ZTE Multi-Service Access SolutioConpyright ZTE. All rights reserved

• Traffic statistics

• Service based rate limit

• WRED and triple color

• SLA: CIR, PIR, EIR, MBS

• Security

_ L2- L4 ACL

_ IEEE 802.1x subscriber authentication

_ IP and MAC source guard

_ Resistance against DOS attacks

_ MAC/IP anti-spoofing (MAC binding,IP binding, DHCP snooping)

_ Anti-flooding: broadcast packet Suppression, IGMP packet,Suppression, DHCP packet Suppression

_ MAC address number limit based on VLAN or GEM-port

_ Port mirroring

_ User port identification such as PPPOE+ and DHCP Option 82

_ O&M

• Operator security, Multi-privileged operator, SSH v1/v2, FTP/TFTP, ACL

• Management protocol and interface: CLI, Telnet, SNMP V1/V2C/V3, MIBII

• Remote firmware downloads and upgrade

• Environment monitoring, control and alarm

• Performance statistics

• Over-heat protection

_ Environment

• Operating temperature: -5 ºC ~ +45 ºC

• Operating humidity: 5% ~ 95%, noncondensing

_ Dimensions

• 449.2mm (H) * 535mm (W) * 270mm (D) (21 inch shelf)

• 443.7mm (H) * 482.6mm (W) * 270mm (D) (19 inch shelf)

• 2200 mm (H) x 600 mm (W) x 300 mm ((D) (Rack)

_ Weight

• 60kg (Empty rack for 19inch and 21 inch)

• 175kg (19 inch rack)

• 183kg (21 inch Rack)

• Working voltage: -48 V (±20%) or 220V AC(±20%, 50Hz)

_ Power Consumption

• GPON

: 1400W (21 inch rack')

: 1250W (19 inch rack')

• EPON

: 750W (21 inch rack')

: 680W (19 inch rack')

• 10G EPON

: 1250W (21 inch rack')

: 1130W (19 inch rack')