Outdoor ADSS Self Supporting 12 Core Single Mode Fiber Optic Cables

Introduction

ADSS Cable (All Dielectric Self-supporting Aerial Cable) is loose tube stranded cable. Fibres are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered witha thin polyethylene (PE) inner sheath. After two layers of Aramid yarns are applied in two directions over the inner sheath as strength member, the cable iscompleted with PE or AT outer sheath.After two layers of Aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with PE or AT outer sheath.

Application

Long distance communication and local area network, especially suitable for long span environment,

complex area.

Erect on the same pole with power line in new and old power line.

Features

1. Small cable diameter, light weight, 1500m span, low attached load on tower

2. Tensile strength is over 90KN

3. Non-metal structure, good insulation, anti-thunder

4. Fine production technology, even force for aramid fiber, with superior stress flexibility

5. Anti gun fiber

6. Anti electro-corrosion

7. Adapt for bad climate

8. May construct without power cut, a power line failure doesn’t influence cable’s normal transfr

9. Tensile units are elastic modulus aramid fiber

10. Electric trace resistant outer sheath is adopted to run safely under a circumstance of space electric 

field (E)≤25KV/m 

Technical Data

Fiber Information

Cable Structure