stainless steel heat exchanger for Swimming Pool or Spa Heating

Specifications

We produce the following products for solar, boiler or heat pump heating system

Stainless steel pool heat exchangers

Titanium pool heat exchangers

Sidearm heat exchangers

Stainless steel electric pool heat exchangers

Titanium electric pool heat exchangers

Feature of stainless steel pool heat exchangers

1. Material:full stainless steel 316L

2. Tubes: spiral twisted tubes

3. Connectors: BSPT thread or NPT thread

4. Design pressure: 1.31MPa
5. Design temperature: 208C

5. Surface: polished

6. Mounting bracket is available

7. Special design for boiler or solar water pool heating system.

8. Packing: carton with wooden case.

Advantages of stainless steel pool heat exchangers :

1. Increase heat transfer efficiency for water heating
2. Big flow with low pressure drop design suitable for all application.
3. Prevent the fouling or scare on the tube surface.
4.Full titanium construction produces a high anti-corrosion advantage for swimming pool water, sea water, and other solutions with high chlorine concentration.
5. Polish surface has a good feature.
6. Compacted design
7. Durable material constructed

Heat Exchangers Performance of Swimming Pool Heat Exchangers:

Note:

1. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;

2. Nominal values are based on 60°C temperature between incoming heating and heated water.

Typical residential application:

In-floor heating

Swimming pools, spas heating

Driveway snowmelts

Typical industrial application:

Oil cooler

Transmission and engine cooler

Boiler sample cooler

Waste water heat recovery