Battery Capacity Analyzer

FST-F7000 Battery internal resistance tester

At present, Iead acid storage battery’s maintenance is applied for the check of Float voltage of battery at home, it has been found that Voltage is irrelevance with Capacity of battery, because Voltage is only to show battery’s basic parameters.

Internationally, Resistance test is widely applied in daily battery maintenance instead of Voltage check, because Resistance is reflection to internal parameters of battery with high precision worldwide.

Regarding the conclusion about Conductance and Capacity: when battery conductance is lower than 25% of Initial Value ( basic value) ,battery can’t be the test of Capacity. When battery resistance is higher than 2times of Initial Value ( basic value), battery capacity will be lower 80% of rated capacity.

FST-F7000 Storage battery internal resistance tester is as digital storage and multifunction test equipment which can quick and accerate measurement of battery running status .it can show and record multigroup battery voltage,resistance etc. and also precisely judge battery’s condition( Good or Bad) and Data anlyzing software.

 Feature

High precision online testing, Full automatically switch the testing range, Great capacity data storage.

1. 1.        Automatically switch the testing range between 0.000mΩ-99.999mΩ.
2. 2.        It can store 999 groups battery parameter.(Max. 500 cell battery per group)

3.  It can store 200 groups battery parameter setting.

English Menu, 320*240 LCD Display.

Connect to PC by USB or RS232 and transmit the testing data to PC and storage, it is convenient to analysis the battery according to the history data.

Powerful data management function.

Enhanced over pressure protecting function.

Self recovery the over current protecting function.

Use the SOC chip to improve the testerstability.

Big capacity Lithium cell and AC 100V-240V power supply

Low battery indication

Smart and portable.

Automatic testing mode make user to test expediently.

Powerful PC software for manage the testing data.

1. 1.      Automatically analysis battery “bad” state.
2. 2.      Building the history record base, describe the battery FSTe curve.
3. 3.      Batteries contrastive analysis in the same battery pack.
4. 4.        All batteries are administrated by different levels(excellent, good, medium, bad)

5. Individual lead cell measure or mono-block (Up to 16V)

6. Over-current protection

7. Polarity protection

Function

1. 1.      Test the battery voltage and internal resistance online.
2. 2.      Battery internal resistance and voltage out of gauge alarm.
3. 3.      All the battery parameter is marked group No. to make the user manage the data expediently.
4. 4.      PC software analysis the battery according to the history data.

Technical indicator

Standard configuration: