Angle Roll Forming Machine

   Angle Roll Forming Machine   

Support you money !! Support you service !! Support you technology !!

PLC control system !! Hydraulic cutting system !! Mult-language conversion system !!

Furring Angle Making Machine  is a strip of raw materials, through continuous cold rolling molding, production of complex cross-section profiles, which consists of decoiler, guide rack, forming hosts, calibration device, cut-off part, receiving station , composed of electrical control and so on. It is easy to use, easy to operate and so on.

Angle Roll Forming Machine   Material:
Processing material: colored steel plate, galvanized plate, or aluminum plate Material

thickness: 0.4---0.8mm 
Material hardness: 550 mpa---350 mpa 
Forming speed: 20m/min 
Angle Roll Forming Machine   Technological process:

Uncoiler-feeding system-roll forming machine-cutting system-table

Angle Roll Forming Machine    Uncoiler system:
Usage:It is used to support the steel coil and uncoil it in a turnable way. 
Passive uncoil pulled by roll forming system 
Loading capacity:1500kg 
Uncoiling width:300mm 

Inner diameter: 450-550 mm

Angle Roll Forming Machine    Entry Beach:
Usage:Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. 
Angle Roll Forming Machine     Main Roll Forming System: 
Usage: In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission ,roller was chromed which can keep the molding plate surface smooth and not easy to be marked when it is being stamped. 
Length of the main part: about 3000 /800 /1400 
Weight of main part: 3000kg 
Voltage : 380 V/50HZ 3Phase or as your required 
Roller fixer : middle plate
Frame : 450 H steel welded 
Drive mode: gear 
Material of rollers:GCr12MoV, surface hard chromium plating. 
Material of shafts: 45# steel with tempering
Diameter of shafts: φ 40mm 
Number of rollers : 10 rollers 

Main power: 3 kw

Angle Roll Forming Machine    Shearing Mechanism:
Feature : Ensure stability, precision and cutting speed 
Function : Automatic cutting controlled by PLC 
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. 
Material of blades: Cr12 quenched 
Power supply : hydraulic power 

Components:It contains one set of blade , one hydraulic tank and one cutter machine.

Angle Roll Forming Machine    Hydraulic Station: 
It is controlled by gear pump. After filling the hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. 
Power: 5.5 kw 
Hydraulic oil: 46 # 

Angle Roll Forming Machine     Electric Control System:

1. Adopted PLC , frequency converter , Delta touch screen from Taiwan to ensure high speed with stability, precision and lifetime. 
2. Other electric element are Panasonic 

Angle Roll Forming Machine   Warranty:
1. One year, and we will provide the technical support for the whole life. 
2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD50/person/day for salary. 
3. Need one technician. 

4. Training time: one week (contains the time of installation and adjustment)