Auto Bicycle Wheel Tureing Machine

Specifications

Bicycle wheel spoke nipple machine
 Specification:

* WHEEL DRIVING AND TUREING BY SERVOMOTOR WITH PC BASED CONTROL SYSTEM.

* USE SENSORS TO FIND THE SPOKES FOR TRUEING, WHICH CAN PREVENT THE DEFECT OF SPOKES’ SURFACE WITH SCAR.

* AUTOMATICAL ADJUSTMENT FOR DIFFERENT SIZE, WHICH IS COUPLED DRIVING TYPE TO MOVE UP AND DOWN DEVICES AT ONCE.

* AVAILABLE TO MAKE FOR 36 SPOKES TENSION KEEPING WITH ACCURANCY ±15KGF.

* AVAILABLE TO SET FOR REQUIRED TRUEING MODE ACCORDING TO WHEELS’ QUALITY.

* TRUEING BY SINGLE HAND AVAILABLE WHEN SPACE BETWEEN SPOKES IS SMALLER, SUCH AS SMALLER SIZE OR MORE SPOKES OF A WHEEL.

* WITH TOUCH SCREEN INTERFACE FOR EASY SETUP.

* WITH SCREENS TO DISPLAY REASONS FOR NUMBER OF REJECTED WHEELS, AVERAGE TRUEING TIME, INDICATION FOR SENSOR WITH PROBLEM, AND ETC.

* THE TRUEING REQUIREMENT CAN BE  STORED IN THE MEMROY, AND THE OPERATOR CAN EASY CHOOSE A KNOWN WHEEL TYPE FROM THE DATABASE.

* AWITH TWO OUT-GOING TRACKS: ONE FOR GOOD WHEELS AND THE OTHER FOR REJECTED ONES.

* UPTO 0.15 M/M TRUEING ACCURACY.

* APPLY TO 16” - 28” WHEELS, INCLUDED DEEP-V TYPE.

* SIZE OF NIPPLE: #12, #13, #14,#15

* SUITABLE SPECIFICATION:

   (1). HUB AXLE: f 8 - f14.5M/M

   (2). MAX. HUB LENGTH: 220 M/M

   (3). MIN. HUB INNER WIDTH: 65 M/M

   (4). WHEEL WIDTH: 14 – 45 M/M

* DIMENSION: 1300(L) x 1250(W) x 1650(H) M/M

* WEIGHT: 750 KGS

* CHANGE OVER TIME: 10 MINUTES

*  TRUEING TIME: