Q41F46-16 Zhitai Pneumatic lined ball valve

Specifications

Q41F46-16  Zhitai Pneumatic lined ball valve  

Overview: 
lined ball valve is used as a lining of fluorine plastic, and with new band rod sphere structure, coupled with its unique elastic lip seal seat structure, it has the advantage of ordinary ball, large differential pressure and temperature changes within a high sealing performance and low operating torque. For the use of the switch or adjust the product is suitable for a variety of industrial pipe conveying liquids and gases (including steam), various acids, bases, salts and other corrosive media can well work for. full size valves provide maximum flow, and can be used to scan lines cleaned or quarantined transport pipeline. 
products are widely applicable to a variety of different types of industrial pipe, liquid and gas (including steam gas) conveying severe corrosive media, especially the use of occasions, such as: sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, alkali, aqua regia with strong corrosive media. 
Technical parameters:
design criteria: GB12237-89SNV enterprise Standard 
the length of the structure: to GB12221-89 JB1686 
flange standard: JB/T79 GB9113 HG20592 ANSI B16.5 
nominal pressure: 1.0 1.6 , 2.5MPa 150Lb 
Inspection and Test: JB/T9092-99 spark detection 
drive mode: Manual, worm gear, pneumatic, electric. 
 
The main dimensions and connection dimensions( mm ):
 

Pneumatic actuators :

Feature:

1. The design of rack and pinion double-piston

2.The extruded high-quality aluminum alloy cylinder ,its longer service life and low friction coefficient.

3.Unibody design ,double acting and single acting have the same cylinder and end cap.

4.Four adjusting screws can make the actuator more accurate .

5.Position indicator consistent with VID/VIE3845,NAMUR standards.

6.The gas source interface in line with NRMAR standard.

7.All fasteners are made of stainless steel ,to enable long-term corrosion resistance.

8.The connection parts are in line with new international standards ISO5211 and DIN3337(F03-F25).