VIT Anion gold paint the whole wall effect ( SWA-1251 )

Specifications

VIT Anion gold paint the whole wall effect ( SWA-1251 )

Model: SWA-1251

VIT Anion gold paint the whole wall effect ( SWA-1251 )can effectively release negative ions to purify indoor air, degradation of harmful substances, has a powerful environmental protection, mainly applicable to all types of high-grade commercial housing interior decoration. especially for hospitals 、schools、and high grade residences .

Feature

release negative ions

Ultra-Low VOC

With unique release negative function .

Elimination of harmful gases (formaldehyde ) .

high covering power .

high-pollution resistance

Scouring resistance and net-flavour .

Packing :        5L   18L

Theoretical Coverage : Theoretically 1 litre of this product covers 12 -15sqm in 1 coat. Coverage varies considerably depending on application methods and surface roughness and porosity.

Technical parameters  : The  roll and brush ratio : SWA-1231 paint 100 : water less or equal 30 . 

                    Spray ratio : SWA-1231 paint 100 : water 20 .

                    Scrub resistance more than 30000 times .

                    VOC content less than 15 g/L

Application  method:  roll 、 rush 、spary  .

                    Putty  powder (SWA-0001)

                    Drying time more than 24 hrs

                    Sanding with 320# sanding paper

                    VIT Primer ( SWA-0012 )

                    Coating weight 10~12sq.m/L/1 coat

                    Surface drying 30 mins .hard drying 24 hrs

                    Sanding with 320# sanding paper

                    VIT Anion gold paint the whole wall effect ( SWA-1251 )

                    Coating weight 12~15sq.m/L/1 coat

                    Recoat the SWA-1251 paint (the recoat time should be more than

                    2 hrs).don`t need to sanding anymore.

Note　　　　　　　　　　　 　　　　　　　　　　　　　　　　　　　　　　　　　　　
1, interior latex paint for the water-based paints, organic solvents to prevent contamination;

2, the wall should be dry, moisture content <8%, PH value below of "10, no cracks, no dust and loose material;

3, to keep the construction environment is clean, the construction work on-site temperature> 5 °C, humidity was "85%;

4, do a good job during the construction of the necessary labor protection.

Storage

placed in dry and cool place, avoid sun and rain and high-temperature, shelf-life of 1 years.the tempreture of the paint stroe place should be high zero degrees to prevent it frost.