3phase line/load electrical power inductor for generator or inverter

Brief specification

1. Power inductor is installed between the power and the inverters, to limit the voltage of the incoming line, restain dv/dt and di/dt of the thyristor. It can prevent harmonics and effectively improve power factor.

2. It is devided into two type:

The pressure drop of the benchmark Ud=2%, used for no feeder unit inverter;

The pressure drop of the benchmark Ud=4%, used for belt feeder unit inverter.

3. Used to limit the current impact of power grid voltage fluctuation and operating over-voltage.

Smooth powder supply voltage contain spikes, or smooth commutation bridge rectifier voltage generated defects.

Main Parameters

Material of Coil:             All-copper windings, for longer life.

Core:                             Iron Core,with high-quality silicon steel sheet, end face with high-quality silicon gel,                                             which greatly reduces operation noise.

Phase:                          Three or Single as customzied

Applicable standard:    Design,manufacture according to  IEC289:1987Reactor  GB1094.11Reactor(eqvIEC289:1987)

Rated frequency:                 50/60HZ (other frequencies available).

Noise:                            less than 60dB

Quality control:              Manufactured under ISO 9001 quality management

Location and execution:Indoor only, with altitude of less than 1000 meters below,if more than 1000m,pls advise

Ambient temperature:   -25°C~40°C;

Relative humidity:         85% (at 25°C);JB/T9644-1999 Semiconductor Electrical Drivers Use Reactor

Surroundings:             It should be installed at indoor without shaking,harmful gas,steam,electric dust and explosion.

Logo:                           HSLEC or OEM as customized

Features:                     Small volume easy to install and transportation

Our customers:            Siemens, ABB, Schneider, Emerson, LG, GE, FUJI, etc.

 

 

 

 

 

 

 

 Installation site

Technical paramenters

 

 

 

 

 

 Note: 1.Data included in the bracket is the value of single quadrant operation speeder.

 

More other pictures

 

 

1. Pre sale service

     a.  make technical solution

     b.  send quotation, technical data sheet and drawing

     c.   make manufacturing plan, testing plan,and shipping plan

2. In sale service

    a. supervise the manufacturing schedule totally in accordance with the plan

    b, send photos to customer during every manufacturing process(hold point)

    c. inform the customer one week before testinng.

    d. book hotel and ticket for customer if they will come do FAT.

3. After sale service

    a. installation and commissioning

    b. training  the workers

    b. quick response within 12 hours any time

4. Warranty Policy 

a) The guarantee of the individual transformer to be supplied shall be for 12 months from the date of delivery against any delivery manufacturing defect on account of improper design, bad workmanship or poor quality of raw material used etc. and any such defects occurring within the above period will be repaired/replaced by us provided the maintenance of transformer are done as per relevant specification.

b) All claims under this warranty must be submitted in writing to HSLEC within 30 days of the occurrence,Upon receipt of such notice,HSLEC shall promptly repair or replace the defective GOODS or part thereof without any cost.

c) The warranty shall be void if (a) the equipment is damaged by the customer, is improperly used, is subjected to an adverse operating environment, or is operated outside the limits of its electrical specifications; (b) the equipment is repaired or modified by anyone who is not  familiar with this product. or (c) has been used in a manner contrary to the product's operating manual or other written instructions.

About HSLEC

1.Founded in 1992,Huashenglong Electrical Equipment Co.,Ltd.(HSLEC)is a mamufactuer of dry type transformer and dry type reactor,located in Qinhuangdao,a beautiful coastal city of China.

2.We are able to research,develop,and produce many types of dry type transformer and dry type reactor,high and low voltage transformers ,air core reactor,line reactor and so on.

1.Q: Are you manufacturer or trading company?

   A:  Manufacturer

2.Q: What is your minimum order quantity?

   A: 1 set.

3.Q: What is your delivery time ?

   A: Depend on the type of transformer.

4.Q: What is your payment term?

   A:  30% advance by T/T  , 70% before delivery by T/T or L/C

         or we can discuss about it.

5. Q: What kind of supporting documentation you can provide normally

    A: Quotation,outline drawing,manufacturing plan, quality control plan

         testing plan, financial report, type test report(KEMA, CESI),reference list,etc

6. Q:What is your normal wanrranty period?

     A: 12 months after transformer operation.

7. Q: Can u do installation and commissioningin user's site?

     A: Yes, we can send our installation team to user's country for service.

8. Q: Do you have any experience in this kind of transformer?

     A: Yes, we can provide reference list for check.