BKGKL series high voltage dry type air core shunt reactor

Product Introduction of BKGKL series high voltage dry type air core shunt reactor 

 BKGKL series dry type air core shunt reactor is mainly used for stopping higher frequency voltage caused by capacitance effects under the long circuits of no-load or light-load

The basic order data of BKGKL series dry type air core shunt reactor

1.System rated voltage and frequency 

2.Reactor long term working current  

3.Reactor rated reactance or reactance ratio   

4.Reactor Install method   

5.Reactor Incoming and outgoing line angle        

6.other special requirement

Technical parameters of BKGKL series dry type air core shunt reactor

1.System Voltage (kV)

2.Frequency (Hz)
3.Basic Impulse Level (kV)
4.Reactance/Inductance (Ohms/Microhenries)
5.Continuous Current (A)
6.Short Circuit Levels (kA) - Time Duration (Sec)
7.Fundamental/Harmonic FrequencyLevels(Hz)
8.Q Required for Filter Reactors
9.Insulators supplied or not supplied and TR No. or type to be used 
10.Vertical or Horizontal Mounting
11.Three phase side by side or vertical stack mounting
12.Terminal configuration 
13.Dimensional Limitations
14.Number of Units

Features  of  BKGKL series dry type air core shunt reactor

 1 To Add Line Impendence.

 2 To Provide Some Light Buffering Against Low Magnitude Line Spikes.

 3 To Reducing Harmonics.

 4 To Compensating For A Low Inductance Motor.

 5 Only As Part Of A Filter For Reflected Wave Reduction

Routine Tests

1. Measurement of winding resistance

2. Measurement of voltage ratio and check of phase displacement

3. Measurement of short-circuit impedance and load loss

4. Measurement of no-load loss and current.

5. Dielectric routine tests.

Service Conditions

 1. Service Site: Indoor Or Outdoor

 2. Ambient Temp.:-5~40 Degree( Or According To Customer's Requirement)

 3. Altitude: <=1000m( If It Exceeding To 1000m, Pls Declare In Order).

 4. Max. Wind Speed: 35m/S

 5. Relative Humidity: <=90%

 6. Earthquake Resistant Capability: Horizontal Direction 0.3g Verticle Direction0.15g (Or By Customer's Requirements)

Application

HSLEC

1.Qinhuangdao hua sheng long electric co., LTD. is founded in 1992, and it is a high-tech enterprise in hebei province.

2.It is the collection research and development, production, sales and service in the integration of dry type transformer and reactor professional enterprises, annual production capacity of over 500000 kva.

3.We have one machining workshop, two wire winding workshops, complete special-use and universal-use equipment, a complete set of inspection equipment, and large-scale winding equipment.

4.Company's products adopt national standard, they can satisfy the requirement of Europe and the United States and other advanced country standards.

Certification

International Market

1.During the past 18 years, we have continued to upgrade and improve our equipment and our quality control system.

2.Now,HSLEC is a top ranked manufature in China's electrical equipment industry, and our power transformer,

current-limiting reactor,etc.,are exporeted to America,India,Thailand,Turkey,Georgia,and Sigapore,among others.

Customer visit

Workshop

Equipment

1. Pre sale service

     a.  make technical solution

     b.  send quotation, technical data sheet and drawing

     c.  make manufacturing plan, testing plan and shipping plan

2. In sale service

    a. supervise the manufacturing schedule totally in accordance with the plan

    b. send photos to customer during every manufacturing process(hold point)

    c. inform the customer one week before testinng.

    d. book hotel and ticket for customer if they will come do FAT.

3. After sale service

    a. installation and commissioning

    b. training  the workers

    c. quick response within 12 hours at any time

1.Q: Are you manufacturer or trading company?

   A:  Manufacturer

2.Q: What is your minimum order quantity?

   A: 1 set.

3.Q: What is your delivery time ?

   A: Depend on the type of product. 

4.Q: What is your payment term?

   A:  30% advance by T/T  , 70% before delivery by T/T or L/C or we can discuss about it.

5.Q: What kind of starndard you follow?

   A:  IEC,, GB, etc

6. Q: What kind of supporting documentation you can provide normally

    A: Quotation,outline drawing,manufacturing plan, quality control plan,testing plan, financial report,referencelist,etc

7. Q:What is your normal wanrranty period?

     A: 12 months after goods shipped.

8. Q: Can u do installation and commissioningin user's site?

     A: Yes, we can send our installation team to user's country for service.

9. Q: Do you have any experience in this kind of product?

     A: Yes, we can provide reference list for check.